Corrugated board for roof C8 all sizes

The manufacturing and specifications for the application of this sheet profile comply with the requirements of TU 1122-079-02494680-01 and TU-11 2000004-1394544-06.

Material of the initial workpiece:

• thin-sheet galvanized rolled steel grade 01 in accordance with GOST R 52246-2004;
• steel zinced with a polymer coating according to GOST R 52146-2003.

Characteristics of corrugated board C8-1150 for mounting or layout

• useful (working) width of the profiled sheet - 1.15 m. (1150 mm.);
• the total (overall, overall) width of the profiled sheet is 1.2 m (1187 mm).
• useful (working) area of ​​one sheet without taking into account the transverse overlap (overlap) = 1,15 m. × sheet length in m;
• total (overall, overall) area of ​​one sheet = 1.2 m. × sheet length in m.

The profile is made in length from 0,5 to 12,0 meters at any frequency of cut according to the sizes of the Customer.

Profile characteristics by weight and size

Calculation of the weight of sheet and batch of corrugated sheet S8-1150

• weight of one sheet = weight of running meter at sheet thickness t × sheet length in meters;
• total lot weight (order) = weight of running meter at sheet thickness t × total number of running meters or weight of one sheet × number of sheets (for a batch of sheets of the same length and thickness).

Price of profiled sheet C8

Notes to the price table of Prof. C8:

1. The cost of the profiled sheet С8-1150 is indicated for the brand rental 01 in accordance with GOST R 52246-2004 (steel OH according to GOST 14918-80).
2. The painted profiled sheet is made with a polymer coating polyester, pural, PVDF or PVC plastisol. The color of the polymer coating is located on the side A and / or B of the profile (see picture above).
3. The price of profiled sheet C8 with a polymer coating is indicated for the material of the preform of steel hot-dip galvanized steel with a polyester coating.

Calculation of the cost of corrugated board S8-1150 per m² (sq.m.), ton or sheet for sheet thickness t:

• price per worker (useful) m² = price for running meter  ÷ 1,15;
• price for a full (total, overall) m² = price per running meter ÷ 1.2;
• price per ton = (price per running meter ÷ weight of running meter) × 1000;
• price per sheet = price per running meter × sheet length in meters.

The total cost of the order (party) of the profil sheet C-8x1150 is calculated as the product of the number of sheets in the order per price per sheet or as the product of the price per running meter by the total number of running meters in the order.

The possibilities of using the C8 profile in construction

• roofing on a continuous crate (covering the roof);
• element of the construction of prefabricated buildings and structures;
• metal roof from galvanized and painted proflista;
• frame structures from corrugated sheets;
• shield shields and panel structures made of galvanized and painted profiled sheet;
• external walls and wall constructions of small architectural forms (pavilions, garages, block houses, cabins, etc.);
• metal fences made of profiled sheet galvanized with a polymer coating;
• wall covering, protective and decorative, made of galvanized and painted steel;
• facing material of walls and wall constructions of composite prefabricated buildings and structures;
• sandwich panels for element-by-element assembly;
• prefabricated sandwich constructions of walls, roofing, interior and fire barriers, etc .;
• fences from corrugated sheets with protective decorative coatings.

Profiles pictures

A sample of C8 corrugated board green

The photo shows a sample of the S8 profiled sheet with a "tree" pattern ("dark oak" coloring)

Galvanized fence made of corrugated board S8

Photo of a colored fence made of corrugated board C8

Profiled sheeting C8 for external finishing  at home

* Note.
In the technical literature on construction and in the catalogs of building materials, the following conventions for a steel cold-bent sheet profile with a trapezoidal shape of the corrugation (profiled sheet) C8-1150-0.4 (0.45, 0.5, 0.55, 0.6; 0.65, 0.7, 0.75, 0.8):

1. The designations adopted according to GOST 24045-94 are the profiled sheet C8-1150-0.4 (C8-1150-0.45; C8-1150-0.5; C8-1150-0.55; C8-1150-0.6; C8-1150-0.65, C8-1150-0.7, C8-1150-0.75, C8-1150-0.8).
2. All possible conditionally abbreviated ciphers and designations - corrugated board C8-1150 (corrugated sheet C8-1200); prof.nastil S-8-1150 (prof.list S8-1150 (8 mm)); profiled or corrugated sheets C8-1150-0.8 (0.7, 0.65, 0.6, 0.55, 0.5, 0.45, 0.4).
3. The arbitrary designations of the profiled sheet are corrugated C8 * 1150 (h8-1150 (1200)) or corrugated board C8 1150 * 0.8 (0.7, 0.6, 0.5, 0.4); corrugated board S8x1150 or profiled sheeting C8-1150-0.4 (0.5; 0.6; 0.7); sheet. the profile is 8-1150 (1200).
4. Specific factory ciphers of individual producers of C8 profiled sheet with a corrugation height of 8 mm are sheet metal. Profile C-8x1150-A, B; metal profile of C8-A or C8-B; profiled sheet C8-1035 or C8-920 (narrow); profile sheet h-8mm; RT-8; TP-8 and others.

Profiled sheeting c8 is the most popular building material, which is practical and versatile. In order to manufacture such material, manufacturers prefer high-quality galvanized steel. It can be either with a polymer coating or without it. The color gamut of the coating can be varied.

Production of corrugated board S8

Make profiled sheets in the form of metal sheets of profiled type. Their configuration can be different:

Trapezoidal;

Rounded;

Sinusious.

Every enterprising person should have an idea that profiled c8, buy in bulk in Moscow you can on our site - this is the most economical kind of building materials in this class. Proceeding from this, the scope and prevalence of it is so wide that the constructions from this material have seen everything from small to large. This is easily explained.

Profilists C8, price per sheet m2 on our site is presented in a competitive price category. These sheets are made of galvanized rolled steel of small thickness, as well as galvanized steel, covering as a protection with polymer coatings. In order to buy profiled sheeting c8 in bulk in Moscow, you should contact our online store. All products that we offer, fully comply with all the prescribed standards and standards prescribed in GOSTs.

Qualified specialists produce profiled c8, price per sheet m2 in Moscow, for this reason is always available to everyone and the material is of high quality. We strive to ensure that this material is accessible to everyone, because we understand that it is very popular today.

Where is profiled c8?

The sphere for the application of this building material can be a huge variety. It is interesting that they buy C8 profiled sheeting in bulk, both professional builders and ordinary people who need to build various kinds of buildings at home.

The wall profiled sheet S8 is bought in Moscow for realization of the most various and unusual purposes. Let's consider some of them:

Fencing;

Frame type structures;

For roofing of roofs.

Use this material to protect individual territorial areas, for example, so that people do not enter, and to protect the structures that were erected in these territories.

The list of application of corrugated board, the price per sheet of which in our company will be available to everyone, could be used for a long time, but the main criteria of the goods on our site are:

Quality;

Reliability;

Practicality;

Durability.

If you need to buy in bulk in Moscow profiled c8, you should contact us. Our materials will have the following properties:

1. It is resistant to corrosion, chemical and atmospheric influences.
2. The material is lightweight, which guarantees ease of installation and transportation.
3. Ensures safety - C8 corrugated sheet does not lend itself to slight fires.
4. In operation this material will be economical - after cutting, there is practically no waste left. If you wish, you can order specific sheet sizes, which will be necessary for your specific case.
5. The price per m2 sheet in Moscow will be affordable with magnificent decorative qualities.

Profitable purchases in our company

On our site there is a wide range of products, which is suitable for both price and performance. We guarantee that each C8 profiled sheeting is hermetically sealed and durable. The profile pattern is designed in full accordance with the length of the entire sheet. In the same way, the height, length and width of the product that is being manufactured are observed.

If you have any questions, you can contact our consultants for help. If necessary, a person will be sent to the work site, which measures the amount of material necessary for your case.

Technical characteristics of corrugated board

Materials that you can find on the pages of our store, have the following indicators:

Sheet thickness is 0.45 m - 0.70 mm;

Width in general - 1200 mm;

We take care of the fact that the deals are the most beneficial for both parties, therefore, when you visit our website, you will find full information about the characteristics and scope of the goods. If you want your house to look perfect for a long time, regardless of the price per sheet m2, such an investment will be rational.

Wholesale purchases in Moscow are offered by our company. We guarantee not only affordable prices, but also delivery around the city and the region in the shortest possible time.

Metallic & Co

Profiled sheeting C8 is universal building material, which is actively used among experienced specialists in the installation of roofing, fences and other structures.

C8 is a profiled economical class in comparison with other markings. The material is excellent as a lining material or for the implementation of suspended ceilings. Considering the low load-bearing capacity of such corrugated board, C8 is rarely used for installation pitched roofs  with angles of slope not more than forty percent.

Features of product manufacturing

The corrugated board of the brand in question is produced on the basis of cold-rolled thin-gauge steel, the thickness of which varies from 0.5 to 0.7 mm. The materials are manufactured on the basis of the following raw materials:

1. Cold-rolled steel in rolls, corresponding to GOST R 52246-2004 with zinc coating for protection.
2. Galvanized metal with polymer layer  (GOST R 52146-2003), as well as steel with a paint and varnish coating.

The production line for the manufacture of galvanized corrugated board C8 includes the following equipment:

1. Uncoiling tap for feeding sheet steel.
2. Rolling mill.
3. Guillotine shears.
4. Receiving mechanism.
5. Oil plant.
6. Operator's console with an automated workstation.

Usually the whole process of releasing any corrugated board is fully automated and does not require the participation of a person at various stages of production. Personnel exercise only control over the stable operation of all equipment.

Each sheet of material has a corrugated surface in the form of trapezoids, whose height is equal to eight millimeters. The width of the base is 62.5 mm, and the gap between the corrugations is 52.5 mm. Modern workshops are equipped with rolling mills that are able to produce the profiled sheeting of the brand in question with the dimensions of one sheet from half a meter to 12 m.

What are the requirements for profiled

Normative documents regulate the following requirements for the characteristics of the metal sheet C8:

1. On the front side, slight damage and abrasions are possible, which in no way affect the protective coating.
2. Sheet C8 may have slight deviations from the norm: height +1 mm; width + 8 mm; length +10 mm.
3. Products for fences should be delivered with crescent at a maximum of 1 mm per meter of profile, if the length of the sheet is 6 meters (no more than one and a half millimeters for products that are six meters long).
4. On the 8 mm corrugated board there should not be a ripple on flat areas more than a half millimeters, and on the bends of the edge - no more than 3 mm.

The products are marked in accordance with GOST 24045-94. Thus, the profiled sheet C-8-1150-0.5 shows that this is:

1. Wall material.
2. The height of the trapezoid is eight millimeters.
3. The working width of the corrugated board is 1150 mm.
4. The thickness of the metal used is half a millimeter.

Where it is possible to apply profiled sheet C8

Traditionally, such material is preferably used for the following purposes:

1. Finishing facades.
2. Production of sandwich panels.
3. Construction of auxiliary facilities by private developers.
4. The erection of fences in places where there is no strong wind during the year.

Mounting the roof using a C8 sheet is not possible, since the load capacity of the material is too small for such purposes.

To implement a task from the list above, it is ideal to take a corrugated sheet with a polymer coating. Such material has a long service life, unlike a galvanized analog. The polyester used in the coating extends the service life of the profile to 30 years.

The coating from the Pural allows to achieve a service life of up to 50 years.

The polymeric protective layer based on plastisol has a high resistance to physical effects, the thickness of this coating is 200 μm. The material is excellent for those regions where dust storms, hailstones and so on are possible.

PVDF is also used in C8 sheets. Its main advantage is its resistance to all kinds of chemistry. Therefore, the use of the material is advisable in such a production, as well as in industrial regions and next to the tracks.

The variety of products has led to the fact that today you can also find profiled sheeting with a two-sided coating. Thus, the fence of this material will look fine both outside and inside. Thus, such a variety of profiles has a longer service life than unilateral analogues.

Main features of C8 corrugated board

The material has a minimum weight, which is good for ease of installation. This is quite relevant when building a fence - the weight of one meter will be only 5.57 kg. For the roofing material is used rarely, but here the weight also plays a role, thus it is quite possible to reduce the cost of the rafter system.

Dimensional mesh of corrugated board in stores varies from 0.5 to 12 meters. The longer the length of the sheet, the less there will be joints on the resulting design.

As with other varieties of corrugated board, the working width of the C8 product is defined as the difference between the width and the size of the overlap between the sheets.

Material prices

To buy profiled sheeting C8, it is enough to visit any construction hypermarket, in which a wide range of manufacturers is often represented.

Here are the average market prices per meter of production. If you find a price that is significantly lower, require the seller a certificate of quality, as well as specify the origin of corrugated board.

Often you can find a substandard profile. Its price is noticeably lower, but the service life is also significantly reduced. Such materials can be used for mounting of building canopies, hozpostroek.

C8 profiled sheeting is one of the most popular varieties of profiled sheet, the use of which is practically unlimited in modern construction.

The main advantage of this grade of profiled sheeting is low cost, due to which it is difficult to find a more economical material for facing walls, erecting fences and installing a false ceiling.

Despite the low bearing capacity of the C8 profiled sheet, it is, nevertheless, often used for roof installation - for example, for pitched roofs with an inclination angle of more than 30-40 degrees.

Technical characteristics of corrugated board C8

The production of corrugated board of grade C8 is carried out by the method of cold rolled thin-gauge steel 0.5-0.7 mm thick according to the requirements of GOST 24045-94 and TU 1122-079-02494680-01.

As for other varieties of this construction and finishing material, for the production of corrugated board C8, cold rolled rolled steel (grades 01, 220-350 according to GOST R 52246-2004), galvanized in accordance with GOST 14918, and galvanized steel with a polymer coating (GOST Р 52146-2003) or steel with a paint and varnish covering (GOST 30246).

The surface of corrugated board of mark C8 is a corrugated relief with trapeziums 8 mm high (as reflected in the brand name), the width of the trapezium base is 62.5 mm, and the distance between two adjacent corrugations is 52.5 mm. In addition to the shortened nomenclature of corrugated board (C8), according to the requirements of GOST 24045-94, there is an extended marking of the profiled sheet.

For example, the designation "profiled sheet C-8-1150-0.5" means that it is a wall profiled sheeting with a trapezium height of 8 mm, having a useful (working) profile width of 1150 mm and made of 0.5 mm thick steel. The working width of the corrugated board is defined as the difference in the overall width and the magnitude of the longitudinal overlap of the corrugated board with adjacent sheets.

The width and thickness of steel used for the production of corrugated board are the determining factors of its weight, which is considered to be very small for this brand. For example, the weight of one square meter of profiled sheet C8-1150-0.6 is only 5.57 kg.

Dependence of the weight of one square meter of corrugated board C8 on its characteristics is presented in the following table:

This table is convenient to use, for example, when you need to calculate the weight of a lot of purchased material: for this mass of running or square meters of corrugated board you just need to multiply by the length of a sheet with a width of 1 or 1.25 meters, or on the area of ​​a sheet of arbitrary width, and then the total number of sheets .

But the most basic technical specifications  Profiled sheeting C8 - the ability to withstand loads of a certain magnitude. Earlier we already mentioned that, although in most cases the profiled sheet of this brand is used for the construction of fences, it is not necessary to neglect such an economical option for roof installation.

The following table shows the maximum permissible uniformly distributed loads, calculated for the most common schemes of supporting the profiled sheet - single-span, double-span, three-span and four-span.

The angle of the roof for the facing with C8 profiled sheeting must be at least 15 degrees, while the corrugated sheet is mounted on a continuous lining.

We offer to see how the production of C8 corrugated board is carried out at our enterprise:

Application of corrugated board C8

The C8 profiler is usually not used to create load-bearing structures due to high sail and the smallest of all possible wavelengths, which causes its limited capacity to withstand the load. However, nevertheless, the scope of its application is quite wide and includes the following areas:

• Finishing of building facades
• Manufacture of sandwich panels
• Construction of auxiliary facilities on country plots  (sheds, warehouses, shower, utility rooms)
• Construction of fences in areas for which a strong and gusty wind is not characteristic

Particularly for the solution of these tasks, the C8 profiled sheeting with polymer coating is relevant, as it is not only more aesthetic, but also has a longer, as compared to the zinc-coated version, the period of trouble-free operation. For example, if the service life of the C8 profiled sheet with galvanized coating is about 10-15 years, the polyester applied on its surface extends the operating time to 2-3 decades. The use of the same as a pural coating can prolong the useful life of C8 corrugated board even up to half a century.

To find out more information about the C8 corrugated board you can use the following video: