For owners of urban apartments in multi-storey buildings, the modern construction market offers a large selection of flooring materials, each with its own advantages and disadvantages. Filling polymer coatings are distinguished from this series by one important parameter - they have practically no operating deficiencies.
Self-leveling floors in an apartment are an excellent alternative to classic floor materials, such as tile, linoleum or laminate. They are resistant to wear, water resistant, beautiful, they do not contribute to the development of mold and harmful microorganisms, they are easy to take care of. And the widest assortment of color and decorative solutions allows you to pick up for your home not just a modern and elegant, but an absolutely exclusive option of finishing for each room.
Advantages of polymer floors
If you decide to choose for your apartment polymeric self-leveling floors , then you can be sure that such a decision will please all the inhabitants of your house for many years. Specially selected materials and application technologies make it possible to create flooring in apartments, private houses and country cottages. The main advantages of this solution are:
- perfectly smooth and smooth surface of the floor, regardless of area, no seams and joints;
- full water and water resistance, resistance to temperature differences, both low and high;
- ecological safety - liquid surfaces do not contain harmful components, do not emit harmful fumes when heated or in contact with chemicals, do not cause allergies;
- resistance to mechanical stress and vibration, simple care and high hygiene;
- magnificent aesthetic and decorative properties - you can create a plain matt or glossy or multi-colored patterned floor.
How much are the floors for the apartment?
Of course, liquid floors can not be called a cheap and generally accessible pleasure, because their price while remains one of the highest among materials for sex. However, for those who decide to equip the self-leveling floors in the apartment, the cost of them will be a guarantee of the highest quality and durability. After all, except the right choice the material must also be properly assembled polymer coating, and quite a large part of the cost of sex as a whole is precisely the work. And, to trust the installation is worthy of the masters, to prevent any violations.
Meanwhile, today anyone can choose for himself the type of floor that will meet his requirements, including price. Using the services of Temapol, you also get the opportunity to save on materials and work.
Polymer floors from Temapol company
If you want to equip in your apartment quality, reliable and beautiful floors, ask for help from experts of Temapol. We can always order bulk floors at the manufacturer's price, and also invite a specialist to the place of future work for a more objective assessment of the features of the premises. You can choose the floor design in the catalog of our offers on the company's website. A very large number of photographs of bulk floors is available in the section
The floor in the apartment is a relatively young development, which has already gained a lot of admirers and has become very popular. Particular attention to yourself is attracted by three-dimensional self-leveling floors, which can contain a 3D image with an interesting effect. In short, polymeric self-leveling floors for the home are a group of materials that are applied to concrete base floor, thus becoming not only a protective, but also a decorative layer of the sex itself. Surely you are interested in this technology and are already thinking about how to equip the bulk polymer floor in your home. This guide will help you understand what is liquid flooring for the house, and how they are made.
Classification of self-leveling floors for home
The known variety of liquid floors for houses and apartments can be classified by the number of components:
- One-component floors. Such polymeric floors for an apartment are a one-color coating, used in most cases as a basis for laying a layer of decorative material - they can be a stone, a parquet board or a linoleum. One-component filler floor is thin enough and dries quickly without bumps, seams and cracks. Sometimes such malls can play the role of a separate coating.
- Two-component floors. More interesting polymer floors in the apartment, which contain not only the layer on which the decorative elements are laid, but also the layer with the pattern - it acquires the properties of a three-dimensional image at a certain angle. Such floors are expensive, but they look very nice and stylish.
In the case that the floor surface in the arrangement has large protuberances and height differences, a thicker layer of the polymer floor can be used to level the base - for this, a certain amount of quartz sand is added to the liquid components of the floor. Such intervention increases the drying time of the floor to 5-7 days.
What is the composition of polymeric bulk floors?
The above classification of polymeric floors is not the only one. They can also be divided according to the materials:
- Polyurethane. Such floors are characterized by a good index of impact resistance. Visually, the composition of such a floor is like a thick oil paint. As a rule, the polyurethane filling floor is equipped in corridors, halls and other premises where there is an increased load and intense friction of the coating.
- Epoxy. Organic two-component floors, which are excellent for rooms with a high level of humidity - often such decorative floors in the apartment are installed in the bathroom and in the kitchen. Such floors are the most common of all polymer coatings, low in cost.
- Methyl methacrylate. The solution, which is better than the rest is suitable for premises without heating in winter.
- Epoxy-urethane. Due to its high strength and resistance to wear, they are well suited for crowded places.
Material for the bulk floor should be selected not by cost, but primarily by the type of task performed. It is obvious that for crowded places it is better to choose polyurethane and epoxy-urethane floors that perfectly withstand long loads. For specific conditions of use, you should choose your material.
Also, the polymer floor in the house can differ in surface properties. It can be smooth or rough. What else should you know about liquid floors before you make a final decision before purchasing them?
What are the advantages of liquid polymer floors?
Obviously, the high demand for and popularity with which the liquid floors of homes differ are not taken from the void. This technology boasts a wide range of such positive benefits:
- Excellent strength and resistance to various effects, including chemical.
- High resistance to wear, due to which the filling floor will last for many years and under severe conditions.
- Antistatic - the floor of the house does not collect dust and other particles, it is easily swept and cleaned.
- Complete hygiene and safety for human health, absence of dangerous substances for allergies.
- High level of fire resistance, excellent heat and sound insulation qualities of the filling floor.
- A wide range of color solutions, decorations and styles - the choice of gender is limited by imagination.
It should be noted that the polymer floors for the house are made using seamless technology - this greatly facilitates the process of machine cleaning. In addition, the absence of seams prevents dust from clogging into them, and thereby causing allergies and other troubles. This is another weighty virtue in the piggy bank of the plum floors.
Self-leveling of the floor in the apartment
Of course, it is better to trust such a thing as the device of liquid polymer floors in the apartment, professionals. They know exactly how to apply all the layers so that the final result is durable and attractive. However, the installation of polymer floors can be done on their own. To do this, you first need to prepare such tools:
- Capacity for solution preparation. Its volume can be approximately calculated as follows - for 2 square meters of the space to be filled, 2 liters of the mixture is needed. Thus, for a room of 40 square meters. meters is enough to prepare a container with a volume of about 80 liters.
- Electric drill with a nozzle-mixer. It is possible to mix the solution with hands, but this will not only lead to an increase in the time consumed, but also negatively affect the quality of the floor solution.
- A large spatula necessary for a thorough leveling of the mortar.
- Needle roller or other device suitable for removing bubbles on the floor surface.
Also, before making self-leveling floors in the house with your own hands, you need to prepare clothes for yourself. You should find protective gloves and a mask on your face, as well as special shoes - kraskostupy. It is necessary for walking on the treated surface without disturbing the layer. When all tools and materials for the mixture are ready, we begin.
Surface preparation
If the floor has not been dismantled, it must be dismantled and completely cleaned of construction debris. Using a solution, you should erase grease stains - if you ignore this step, the polymer coating will fall badly. After cleaning, you should carefully inspect the floor for any changes. If such are available, they will need to be repaired. When this stage is completed, the floor needs to be cleaned again, now with the help of a powerful vacuum cleaner.
After the preparation of the floor, its surface must be thoroughly primed. The treatment with a primer will significantly increase the adhesion of the floor to the future polymer floor, and prevent peeling of the finished coating.
Filling the polymer layer
The floor in the house begins with the preparation of a special solution. The solution must be moved to a container prepared in advance, then diluted with water in the proportion indicated on the instructions to the floor. Then connect the drill (or a construction mixer) and mix thoroughly mixed to a homogeneous solution. After this, the resulting mixture must be carefully poured on the floor surface - the floor for the apartment begins to settle from the far corner of the room towards the exit, all as for painting the coatings.
The next step after the application of the solution is the leveling with a spatula and the removal of air bubbles. To do this, it is necessary to accurately roll the bulk floor apartment, trying not to introduce an imbalance in the thickness of the polymer coating.
Finishing of the bulk floor
The applied polymer floor solution should dry completely, which will take several hours. But this is not all - after the layer dries up, it is necessary to apply the "Level". This liquid solution allows to completely smooth out all irregularities and make the floor covering perfectly even. The thickness of the coating should be from 1 to 4 mm. As in the case of a polymer solution, the Leveler must be carefully rolled out with a roller to remove bubbles.
After the leveling layer has dried, the matt floor in the apartment is almost ready. You can leave it as it is, or use a coating as the basis for laying parquet, stone or tile. Even the "bare" polymer floor will look very attractive and will be able to withstand any impact!
Comments: 0
To date, huge popularity in the construction industry began to use self-leveling floors, this was due to their easy styling process, which even a beginner can cope with. Aesthetically the most liquid floors in the house look - they can decorate any interior. But at the same time they can be stacked: in apartments, garages, on sports grounds and in offices.
Self-leveling floors in the house - pros and cons
The main advantages of this coating are its durability, durability and attractive appearance. All these positive qualities make these floors insanely attractive to the buyer. Another of the main advantages of these sexes is that they can be laid with their own hands. But first, let's learn about the types of flooring, its structure, and also how to make a mortar and how to lay the floor.
Basic information
The filler floor consists of a polymer floor covering, which can be laid on cement, concrete base, as well as wooden and tiled floors. Self-leveling floors are found in several types but most often use polyurethane flooring. Of all the varieties of this sex, it is considered the warmest, most beautiful and lightest. To all the rest he has an elegant gloss.
Mixtures for the filling floor are of two types: leveling and self-leveling. Self-leveling mixtures are distributed independently on the floor. When using leveling mixtures, they must be manually distributed throughout the perimeter of the floor. Preparing the base
Before laying this type of floor, care should be taken to ensure that the floor surface is completely flat. To do this, use the level to check the horizontality of your floor in all directions, the deviation should not exceed four millimeters.
We prepare the concrete base
1. Check that the humidity of the floor is not more than 4 percent.
2. Check the compressive strength - it must be at least 20 MPa.
3. If you laid a fresh foundation, it should take more than 28 days, before laying this type of floor.
4. If the base is old, then you need to remove it from the previous coating: remove paint, mastic, glue residues.
5. Clean the surface of the concrete floor from dust, seal all potholes, cracks and chips, use mortar for these jobs, small glue mortar can be used for small damage to the floor. Small irregularities are removed with a grinder.
Now let's look at how to prepare correctly self-leveling floors in the house made of wood
1. Check the humidity of the floor base it should be - a maximum of ten percent.
2. Remove the plinth. Clean the floor of varnish, old paint, glue. To do this, use a spatula or a metal brush.
3. Open the cracks and use a sandpaper to clean the floor for good adhesion.
4. Remove dust with an industrial vacuum cleaner, degrease the surface with an ordinary cleaning powder.
5. Cover the cracks with mortar.
Let us ground the base
Apply primers in order to improve the adhesion of the filling floor, as well as for a good spreading of the solution. A substrate with a porous surface is primed several times. For bases with high porosity, it is recommended to use a high-viscosity primer. Important! When priming the base, the temperature in the room should be stable, otherwise bubbles may form.
To apply a primer, use a roller or a wide brush. The second coat of primer can be applied after the previous one has dried. Proper priming of the surface of the base is a guarantee of a positive result of the whole work. Do not allow the appearance of dust on the primed surface, so one day after applying the primer you need to start laying the floor.
We prepare a mortar for self-leveling floors
To fill the floors were spread evenly, you need to make the solution of the correct density: always follow the recommendation from the manufacturer, where the correct proportions are always indicated. In a deep container, first pour the water, and then pour the same dry mix. To make the solution homogeneous, you need to interfere with it for ten minutes.
Now let's analyze how to lay the filling floor
1. Drain the solution on the surface of the floor. For an equal distribution of the solution, each serving should be poured around the previous layer, use a wide spatula for this work. Pass through the solution with a special needle roller, this is necessary so that air bubbles do not form on the surface.
2. Rinse the second portion of the solution and level it. So you need to fill the whole floor.
3.After the end of the work, the finished floor must be covered with a film. This will help to avoid uneven solidification of the solution.
4.To give the new floor a delicious shine and improve its quality, you can apply a polyurethane lacquer on it.
With a competent work approach, you can achieve excellent results. After all, only under condition of observance of technologies, and also correct operation, liquid floors in the house will long please you with their amazing appearance.
To make a bulk floor by own hands on forces and non-professional builders. Technology is not as complex as it might seem initially. After all, the material used for its installation (for residential premises it is, as a rule, polyurethane), elastic, quite easily stacked. This seamless polymer finish coat is applied to cement-sand screed either a concrete foundation, sometimes ceramic tile or a wooden floor.
As already mentioned, for the house will fit flooded floors of polyurethane. They are safe for health, durable, wear-resistant, besides the lightest and graceful, warm, shiny and have a variety of colors. Specialists recommend a coating thickness of 1.5 mm. A layer thinner than 1.5 mm is impractical, such a surface is easy to deform, and a thicker one is uneconomical.
Tool kit and materials
You will need:
- containers (buckets) of at least 20 liters for mixing the solution;
- drill for mixing (with a nozzle) at least 300 rpm;
- wide spatula for leveling the mortar;
- squeegee with adjustable clearance, necessary for laying the solution;
- Needle roller with 14 mm needle;
- polyethylene film;
- krakostupy (special shoes);
- solvent for removal of polyurethane solution from tools;
- solutions for filling cracks;
- Moisture meter and sclerometer;
Level.
Ground Preparation Technologies
Absolutely any surface that will serve as a base for the flooring must be level to prevent the material from draining. The degree of its evenness can be checked by a two-meter rake-level (deviations are allowed not\u003e 4 mm).
Also, to obtain a smooth surface, it is important to observe a certain humid and temperature regime of the room:
- room temperature is not< 15 гр. С, но и не > 25 gr. C (the exact information is indicated in the technical documentation accompanying the dry mix);
- air humidity is allowed not more than 80%.
The base under the filler floor should be perfectly even, so that in the future it would be possible to apply a high-quality solution
Preparation of wooden base
The three main components of the process of applying a polyurethane coating - "self-leveling floors - technology - with their own hands" is difficult to combine competently when pouring it onto a wooden floor.
It is better to entrust it to a professional or to exclude a wooden base at all. If you are not afraid of difficulties, then follow the instructions below:
1. Make sure that the wooden floor is absolutely dry (humidity is not\u003e 10%).
2. Remove the plinth. After the completion of the work, you will install new ones.
3. Clean the floor of the old paint, glue, varnish with a scraper, spatula, metal brush, grinder.
4. Open the cracks and polish the floor with sandpaper. This will contribute to better grip.
5. Remove dust with a vacuum cleaner, degrease the floor (you can use a cleaning powder).
6. Seal the cracks with mortar. And best of all - level the screed.
Important! Too thin a layer of polymer floor covering applied to a wooden base can quickly crack.
We prepare a concrete rough floor
This is the most the best option bases for self-leveling floors. Sequencing:
1. The concrete base must last for 28 days (if it is new).
2. Check the humidity of the concrete screed (not\u003e 4%). Technology approximate calculation: take a meter sheet of polyethylene film and fix it with adhesive tape on the surface of the base and leave for 24 hours. If a drop of moisture forms on the inner surface of this film within a day, and a damp spot on the concrete, then it is not sufficiently dried. Another more accurate way is to make measurements with a carbide hygrometer (hygrometer).
3. Check the compressive strength (not< 20 МПа), а также прочность на отрыв (д. составлять 1,5 МПа). Для этих целей используют склерометры.
4. Release the previous base from the previous cover (of course, if there is one).
5. Remove any residual glue, paint, mastic, all oil stains from the concrete.
6. Clean the surface of the dust, fix the building resin solution of the crack, chips, potholes, and adhesive solution - small breaks and cracks. Minor unevenness remove the mosaic-grinding machine. Even the entire screed can be used with leveling compounds.
7. Check that the level is horizontal.
A high-quality concrete foundation under the filling floor can prolong its life for several decades
Preparation of ceramic lining
1. Check the strength of the tiles, remove loose tiles and fill in the voids.
2. Degrease the tiled coating with organic solvent
Priming of the base of the filler floor
Primer is the second and very important stage of the whole technological process. The primer is necessary to improve the adhesion (adhesion) of the filler floor to its base, to prevent the formation of air cavities and to improve the spreading of the floor.
Porous and dry surfaces are primed in several passes until all pores are completely closed. If the base is highly porous, then it is expedient for it to apply high viscosity primers.
The room temperature when priming the substrate must be constant or decreasing, otherwise bubbles will inevitably form.
Primer is applied with a wide brush or roller. When the first layer dries, the next layer should be applied. Do not allow the dust to settle on the primed base, so you need to start about filling the floor in about a day.
A high-quality primer helps ensure that the floor is distributed evenly on the base and looks impressive
Prepare the filling solution
1. In the proportions specified in the manufacturer's instructions, it is necessary to pour the water into the container, and then pour the dry mixture into the container.
2. Using an electric drill with a nozzle, the solution is mixed for 10 minutes with small interruptions until a uniform mass is obtained.
3. Conduct a spread test.
Flow test
1. Take the light plastic ring 4-5 cm tall and 5 cm in diameter. A lid from a can of shaving foam with a cut bottom will do.
2. Place the cover on a flat, smooth surface (preferably on the glass).
3. Pour the finished solution into this cover.
4. The lid will rise and the solution will spread over the glass.
5. If the diameter of the solution in the spread state is 16-18 cm, then its consistency is optimal. If the parameters are not optimal, a dry mix can be added to the solution or water added to the solution.
Important! An overdose of water in the solution can cause delamination and the appearance of cracks, slow drying and lowering the strength of the filling floor.
We will do our own loading floor!
Work start from the farthest wall from the entrance. It is necessary to fill the floor of one room without any interruptions in work, otherwise there are differences in height.
1. Pour the prepared mortar onto the floor screed so that the strips are parallel to the wall. To spread the solution uniformly and the thickness of the layer is respected, use a wide spatula. Adjust the squeegee thickness of the layer (3 - 5 mm).
2. Roll the mortar of the filling floor with a needle roller to spread it even better on the surface. Remove any air bubbles that have entered the solution.
3. Pour the next portion of the solution, smooth and roll it. Continue until you fill the floor entirely.
4. After finishing the work, you can cover the floor with foil or film, which will prevent dust and uneven hardening.
5. A special polyurethane lacquer can be applied over the filling floor, which will give a special shine to the coating, as well as improve its quality.
6. As decorative elements, you can use small pieces of thin-gauge polymer applied on the newly filled floor. Then they and the entire floor should be covered with a transparent polyurethane lacquer.
Important! The prepared mixture should be applied within 60 minutes, and the time between application of the first and the subsequent portion of the finished solution can be no more than 10 minutes.
Walk on polyurethane the bulk floor permissible after 24 hours, although it will be fully usable only after 5 days. Heating system "warm floor" can be connected in a week.
Application and distribution of the filler floor on the surface of the substrate
Security measures
Dry mixes of the filler floor when mixed with water always give an alkaline reaction, so direct contact with the skin will cause a burn. It must be stored in special gloves with gloves. In addition, the solution has a sharp odor, so mix and fill it in a respirator. The workplace should be well ventilated.
Self-made decorative floors
All decorative floors are manufactured in the same way as conventional ones with the addition of small elements. There are a lot of them. They are:
1. With quartz sand, when using a crumb of small diameter or quartz sand on the coating creates a beautiful pattern.
2. Texture. They are rough and smooth, glossy and matte.
4. Floors with chips. A special decoration effect is obtained by applying colored particles ("chips"), consisting of a variety of pieces of acrylic paint. They are able to give the floor depth, similarity with natural granite or marble.
5. Original ornaments, which are created from multi-colored mixtures.
6. Filling floors with photo and art images are also quite common.
Video instruction: Fill technology
If you approach the implementation of all technologies correctly, then the floor can be made qualitatively and yourself. It is important to strictly observe the laying technology and the operating conditions of the filling floor.
In the modern market there are many types of floor finishing, but this one is perhaps the most durable and aesthetic.
The room with such a floor seems to be complete and elegant. Such a floor does not swell, is not afraid of scratches and dents. Under this floor, lay a warm floor system.
The most interesting is that you can make the floor on your own.
Types of floors
The modern construction market offers customers several types of self-leveling floors:
- Polyurethane floors. The mixture for these floors contains a plasticizer, which allows the mass to be elastic. There are two types of such floors, matte and glossy.
- Epoxy floors. Suitable for creating floors with a 3D pattern. Not as strong as the previous ones.
- Methyl methacrylate floors. Quite durable floors, they are ready for use after pouring in an hour. The filling process is temperature independent, it can range from + 25C to -25C. They are used for pouring building areas, so when heated, it releases toxins.
- Polymer cement floors. Used in living quarters. These floors do not attract dust and are waterproof.
- Acrylic Flooring. Applied to those rooms where very little functionality, as they very quickly fail. But if you add cement to the mixture, the strength of the floor increases. Plus the floor is an extensive color scheme.
Before you get ready to make a floor, be sure to talk with people who already have this floor, read reviews and in any case do not purchase mixtures from unverified producers.
Characteristics of the filling floor
The pouring floor is very cold, it's not easy to walk on it without shoes. To cover the floor with carpets or paths is also not always appropriate, as some people ask the artists to make a 3D drawing on it.
People of average means, most likely, do not want to make such a kind of sex in their home, since it is not budgetary. Of course, to reduce the price will help to combine the floor with other floors. The floor is mainly made in kitchens and, as there is a big risk of water leakage.
Since the surface of the liquid floor is glossy, there is a risk for someone from the household to fall. Therefore, do not install it in a house where there are elderly people.
Disadvantages of self-leveling floors
Of course, there are no ideal floor coverings and self-leveling floors also have a negative quality.
The floor is not an environmentally friendly product.
Choice of the mixture
If you decide to fill this floor, you need to seriously approach the choice of materials, as they are often forged. So, let's look at everything in order.
First, you need to understand what kind of functionality will be available for a room or a room, this is necessary in order to select the appropriate marking mixture.
Types of mixtures
- Thin layer mixture - apply where there is no planned frequent visits to the premises.
- Highly Filled mixture - apply where necessary.
- Quick-drying floors - are used in the premises, which are necessary for the rapid restoration of the functional premises. Minus of these floors, when dried, have a sharp smell, so after pouring the floor, it is better to leave the room.
- Self-leveling mixture - used when the room needs to be cleaned frequently.
The floor is universal and has a wide range of applications.
Self-leveling floor mixes
Before laying the composition, it is necessary to prepare the base.
Since the flooded floors require an even foundation, a self-leveling floor has been developed for this.
Such a mixture is the base under the filling floor, it fills all the irregularities well.
Positive traits:
- Low shrinkage. Due to the addition of plasticizers in the mixture, the floors have a low shrinkage after drying.
- Fine-fractional structure. At the finish has a very flat surface, so it is easy to decorate.
- Durability and long life is a plus of self-leveling floors, they are not subject to any deformations.
In rooms where the collection of moisture is expected, do not recommend using a mixture based on gypsum. In other areas, the use of such material is possible.
Calculation of the flow rate of the self-leveling mixture
There are two variants of mass - it is a mass that is manually leveled and self-leveling.
Self-leveling mixture needs accurate calculation mass, because its laying is done at a time, without doses.
- To begin with, consider all the errors of your gender.
- If the condition of the floor in some places is not satisfactory,
then defects can be eliminated with a solution. - Then find the zero level. The greatest mark is taken as the thickness of the screed.
- The data on the consumption of the mixture indicated on the label is multiplied by the thickness of the layer, the area of the room, and the required amount is obtained for pouring the floor.
To calculate the number of bags of the mixture, you need to add 10-15% to the figure, then divide the result into kilograms indicated on the package of the mixture.
Filling floor installation
Necessary tools for work:
- Building mixer;
- Level.
- Lighthouses.
- Guiding profiles.
To these tools it is also necessary to take a wide needle-shaped spatula and protective equipment for hands, eyes, nose.
Materials that you need to have at your fingertips:
- Damper belt.
- Fibers or reinforcing fibers.
How to prepare the base?
Concrete base
It is crushed, large pieces are removed, dust is collected by a vacuum cleaner.
Reinforced concrete slab
Produce a primer with a special composition in two layers. The second layer of the composition is not applied until the first one has dried.
After cleaning the garbage, a damper tape is attached to the walls to remove the tension of the future plate.
Wooden base
When working in a wooden structure, it is necessary to make a waterproofing, since wooden boards do not tolerate moisture. Sex boards strengthen, joints shpatlyuyut, remove plinths, the whole floor is impregnated and covered with a special film.
Ceramic tile
It is necessary to check the fixing of each tile, remove it, empty the garbage, then fill it with filler.
When pouring the bulk floor, because the mass is not distributed, as it should. The humidity in the room when pouring the floor should not exceed 80%. There is no strict data on the temperature inside the room.
Mix the solution
Dry mix for bulk floor in small lots pour into the water, carefully stirring with a mixer. Mix the mixture for 10-15 minutes, so that there are no lumps.
The finished mass should not be too thick and not too liquid to distribute well on the surface.
Filling the mass
When pouring the floor you need to act quickly and smoothly, otherwise the desired result will not work.
To level the filling floor, it will be necessary to use a needle roller for expelling air and a wide spatula to distribute the mixture at the corners. The floor is flooded, not missing a millimeter. After maturing, the floor is covered with a polymer varnish.
Printouts for floors with a 3D pattern are made in advance, the image is glued to a special surface and covered with epoxy varnishes and resins.
The process of filling the floors can not be called too complicated, but you still need to take into account some of the nuances that we described in the article. If you are not confident in your abilities, better hire proven masters.