In our time, repair is an expensive pleasure, so everyone tries to make it so high quality and beautiful that the interior of the room was pleased for many years. If you want to update the room for water procedures, it's not superfluous to look at the photo options for the layout of tiles in the bathroom. This will help determine the design of the room.
What do we pay attention to when choosing a material?
Ceramic tile is deservedly the most popular finishing material for a bathroom. And this is not surprising, because it is not only distinguished by its aesthetic qualities, but also surpasses many analogues. The advantages of ceramic products include:
- resistance to dust, bacteria;
- ease of maintenance;
- wide range of design;
- low level of electrical conductivity, etc.
Today, the choice of tiles is so great that an inexperienced person is not difficult to get lost in all this diversity. Even without special knowledge of this material, you must know the basic indicators of its high quality. The most important technical characteristics are:
| Degree of moisture absorption | For the bathroom is suitable material belonging to the 1-3 group. Representatives of other categories are more porous and are not suitable for rooms with high humidity. |
| Resistance to chemical reagents | The ability of tiles to resist chemical reactions is noted in Latin letters. In our case, a material with the "AA" marking is suitable. |
| Appointment | The tile can only be used for floors or walls. In the first case, a pictogram with a palm is applied on the package, in the second with a foot. For use in the home, enough will be tiles of the 2nd class of strength. |
| Form, design | You need to choose, not only based on your own preferences, but also taking into account the size of the room. The surface of the material can be matte or glossy. |
7 Ways to Lay the Tile
Sometimes it's not so difficult to choose a material, how to decide how to use it.
Attention! The attractiveness of wall and floor finishing depends not only on the design of the chosen model range, but also on how its elements will be laid.
I would like to highlight the most common variants of tile layout in the bathroom, among which you will surely find something to your liking.
| Seam in the seam | The most simple layout. Its essence lies in the following: the direction of all rows is strictly straight and corresponds to the parallels of the room / geometric lines. To repulse the correct vertical, a plumb line is used, a rectangle is needed to mark the horizontal lines. In this case, it is better to use square elements, but it is possible and rectangular, there is little waste. |
| In the dressing | This option is very similar to brickwork, but it looks better when using a rectangular plate. There are no difficulties with installation, but there are limitations. It is not recommended to use different colors that are too contrasting, because the impression of an uneven surface will develop. |
| Diagonal | The main drawbacks are the complexity and high consumption of material. But the advantage is that using this option, you can correct deviating from the parallels of the wall or enlarge the limited space. |
| Chess | Very similar to the classical way of laying, the only difference is that two colors are used. Pretty popular and practical. |
| Modular | In the process, tiles of different formats are used, at least 3 sizes. This difference creates a dynamic drawing. You can make the ornament clearly seasoned or add bright blotches on a monolithic surface, and also chaotically arrange. It is important to observe one rule - the size of the tiles must be multiple to each other and be from the same manufacturer. |
| Linear | Requires finishing elements of the same size, but different colors. Rows can be made intermittent, parallel, intersecting and they can pass absolutely in any places. This style is more like abstract art. |
| Ornamental | To implement the method, a pattern is selected from different colors, the elements are laid out in a certain order. All this is framed by a curb. As for the pattern, it can be made in the form of a geometric pattern on the entire surface or in some particular zone. |
It is noteworthy that the main options for laying tiles in the bathroom can be used on both walls and floors. There are several other ways, for example, "Herringbone", "Set" - they look like parquet.
Zoning in the bathroom
Almost in any apartment zoning is a necessity, especially for rooms where free planning is noted. Some options for layout of tiles in a small bathroom will help to cope with this task. Most often this is done by using plates of different shades. As a basic design, you can choose a bright, juicy, contrasting tile, or you can, on the contrary, prefer a single tone. With a competent approach it is quite possible to create a whole composition. For example, you can make one of their walls the same color as the floor covering on which the bathtub is installed.
If your bathroom provides expensive plumbing, then you can install it on the tile, which was used in the cladding of walls. With this approach, you can identify almost any element of the interior, which, in your opinion, is worthy of attention.
By the way, speaking about, experts recommend choosing for her a medium-sized tile in gentle tones. It will not look bad mosaic, visually expanding the space. If you want the room to be bright, then it's better to choose just a light tile as the main one and combine it with juicy elements. Remember, light tones always increase space, and dark ones - on the contrary. Helps to cope with this task mirror plates.
If you have decided on the option of laying, it is better to get acquainted with the thematic video instruction.
Bathroom - one of the most important premises in the house. It is here that we spend a lot of time. Here we come for relaxation or a charge of vivacity. It does not matter what size or area the bathroom has. The main thing is that it is comfortable, functional and beautiful. And if with the location of sanitary ware or the layout of the premises it is hardly possible to do anything even within the framework of major repairs, to make the bathroom beautiful and modern enough for every owner of the house - the correct layout of the tiles in the bathroom will help you.
Original tile layout in the bathroom
Traditionally, the interiors of bathrooms are finished with tiles. Why tile? It is durable, uncomplicated in packing, not afraid of moisture. The tile can be washed and cleaned with chemical and abrasive agents, it is durable, practical and a certain layout of the tiles in the bathroom allows you to completely transform the decoration of the bathroom interior in a fairly short time, as can be seen in the photo of the laid out tiles in the bathroom.
Start of work in the bathroom
Are you planning on updating the bathroom interior? Begin it with drawing up of the estimate of repair works. Laying out tiles in the bathroom will be a stage that will be realized in the future. For example, decide whether the plumbing will be replaced with sanitary ware, heating elements, wiring. Such additional costs can significantly increase the overall cost of repairs.
When drawing up an estimate when it is planned to repair or lay out tiles in the bathroom, it is worth considering:
- The average cost of materials and the volume in which they will be purchased;
- Cost of works on the wall lining. If you do not plan to arrange the tile in the bathroom on your own - specify the prices for carrying out this kind of work in your city;
- Possible additional costs. Dismantling the old coating, leveling the surface of walls, applying waterproofing and primer also require certain financial costs. And they should be taken into account beforehand.
Upon completion of the estimate, it is necessary to draw up a layout plan for tiling in the bathroom, with which you can determine the type of layout of the material on the wall surface.
This can be done with the help of special computer programs or manually - using pencils and paper. By the same principle, you can "try on" any decorating of walls, determine the color or arrangement of the pattern on the wall surface. Correct tile layout in the bathroom will perform all its functions.
Tile layout options
Consider some rules for laying tiles in the bathroom. Decorative techniques in decorating the room with tiles are used quite a lot. For example, you can go on a classic scheme, laying the bottom of the wall with tiles in the tone of the floor, and the top - in lighter tones, dividing the border color of the border. And you can choose more expressive layouts of ceramic tiles in the bathroom. For example, choose the same in texture, but contrasting in color tile for walls and ceiling. Or make a layout of the tiles in the bathroom of a monophonic design, but create a bright accent on one of the walls (in the form of a contrasting strip of color or a bright panel).
And what if the tile is planned to trim a small area in the area, if the layout of the tiles in the bathroom is calculated on a small area? Here, interior designers have their own tricks. For example, the glossy gloss of the surface allows you to smooth out the boundaries of space. And white, green, beige tones allow you to make the room visually wider than it really is. Also works to expand the boundaries of space diagonally laying tiles in the bathroom.
Visually stretch the room can be, using an option such as a vertical layout of tiles in the bathroom, placing the ornament at the height of human growth, leaving the lower part of the masonry monophonic. Reduce the height - using a horizontal layout and large elements in the finish.
Whichever scheme of laying the tiles in the bathroom is chosen, orient yourself, first of all, to your own taste preferences. After all, the layout of the tile in the bathroom should create an atmosphere of coziness, comfort and peace. And only then follow the fashion trends or recommendations of designers.
Photos and video materials on the layout of tiles in the bathroom will help you decide on the right option.
Thanks to today's variety of colors, sizes and textures of the tiles, there are a large number of finishes, each of which is good in its own way. As a result, each bathroom can become unique, especially attractive and cozy. In many respects this is possible and due to various styling techniques.
Small space
Given the small dimensions of the vast majority of bathrooms in our country, methods that allow at least visually increase the limited space become important.
Therefore, in order to choose a tile, one should follow certain rules in this case.
What will help to expand the room:
- pattern along the wall;
- glossy or small tiles;
- laying diagonally or horizontally with a rectangular tile;
- mosaic;
- cold, light tone.
If the ceiling is low ...
Such a project further reduces space. Therefore, solutions should be used here that will visually increase the height of the ceiling. For this you need to use:
- at eye level, special inserts;
- ornament or "columns" in the corners;
- stacking in a horizontal way.
Main
Is the most popular. In this case, the products are stacked so that the seams between the tiles are a continuation of each other in the form of a straight line. We get a surface consisting of squares or rectangles - depending on the shape of the tile used.
By using this method, the material consumption will be minimal. Therefore, this method can be considered the most economical.
For a small room, this method is good if you use a rectangular tile, which should be laid vertically on the walls. The floor can be finished with a traditional method and even with square products.
"In the race"
Probably the second most popular option. "In a runaway" is a method, good for uncalibrated tiles - it helps to hide defects.
With this method, the layout resembles a brickwork: there are displacements of half the width of the product of each row.
Diagonally
It is considered the most laborious process with a large expenditure of material. However, in our case for the floor can be a good solution. Products located diagonally, will help visually expand the walls, making the space conditionally large.
Is it possible to use this method for wall decoration? Why not?!
In addition, it will make it possible to hide the nonparallelism and non-perpendicularity of the walls, which in such conditions is also not uncommon.
But in the end we get an unusual drawing, especially if we harmoniously pick up the items. However, the latter put forward increased requirements for dimensional accuracy.
We examined the three most popular ways. Further we will understand in variants which mean usage of two colors at once.
"Chess"
Is it possible to apply such a method in our case? Yes it is possible. The main thing is to harmonize the colors. However, you should be careful when using this method on the floor and on the walls in different colors. This may look inharmonious.
"Modular"
A difficult method that requires vigilance. But in the end, you can get a boring drawing. Tiles should be of the same texture, color, you can choose contrasting options. Also, three types of tiles are used, but with the proviso that their sides will be multiples of each other.
Stacking: a description of the process for the floor
After understanding the layout options, you can go to the consideration of how to perform the stacking. Let's start with the floor.
So, first you need to prepare all the necessary materials and tools.
It should be noted that everything should be with a margin, so that there was no need to postpone the work.
Now you can do surface preparation. From the floor you need to remove the old coating. If it is a tile, dismantle it with the mortar. If the linoleum - remove it.
Then the surface should be primed and dried. As the procedure is performed in the bathroom, it is worthwhile to take care of the installation of waterproofing materials. After this, priming is repeated. It is worth noting that it is not recommended to close your eyes to irregularities, as this is fraught with subsequent defects. In addition, overspending glue. Therefore, it is important to approach this stage with all responsibility.
The procedure is performed starting at the far corner of the door. When designing the installation, it is necessary to take into account the location of the objects, in particular the bath. It is important to do the right first steps, then further work will turn into a mechanical one, and not in search of an exit from the current situation.
So, apply a layer of glue on the first tile with a spatula with teeth. Should remain uniform grooves. We lay it down, following the leveling with the help of a level and orienting ourselves against the walls.
Excess glue immediately remove. So lay out a whole series. Between the tiles, we keep uniform joints using plastic crosses. Joints should be cleaned of glue, so that you can then smoothly apply the grout.
Similarly, we spread all the subsequent series, taking into account the chosen method. Therefore, colors and patterns should be taken into account.
Stacking: a description of the process for walls
The same procedure is followed in the case of walls. Everything starts from the bottom row. If the floor is laid after the walls, then this row is passed, and starts from the second. When the row is laid, you should wait a little to dry the glue. And then you can continue laying the rows.
Grout
The final stage is the mashing of the joints. It is necessary to choose a water-resistant mixture of the required color. It may be a ready-made compound or it must be diluted with water.
Apply the mixture with a rubber spatula. Surplus should be cleaned immediately. And when the grout dries, everything is cleaned up with a damp sponge to get uniform stitches.
Outcomes
As you can see, in the procedure of laying tiles on the floor and the wall there is nothing complicated, but only when everything is well prepared, the layout option is correctly chosen. And in addition you can watch a video about it.