Parents know that the home of a small student must play several roles at once. Corner shelf in the hallway is very convenient, the main thing is to make the right choice of design. The premise for children simultaneously performs the functions of a bedroom, a playroom and a kind of working room and a storage area for children's things.
How to save space in the student's children's room
The general lack of small rooms is the lack of space for storing things.
For this reason, it is extremely necessary to use every centimeter of the living space to store things.
A place of honor in the children's room is occupied by desks. The piece of furniture is often placed along the wall near the window, which gives additional lighting and, to some extent, offloads the room space. His choice depends on the area of the nursery.
The presence of shelves above the table in the nursery, allows you to place on them almost any items that are necessary for the student. Writing desks can be purchased with ready-made shelves. Harmoniously fitting into the interior, the products will save a lot of space.
If there are many books, an attractive solution for the interior will be a corner shelf. For the child, the design can be performed in his favorite color scheme.
In addition to the main tasks, the corner shelf installed in the hallway will serve for storage:
- Backpack;
- Bags;
- Small things.
The main advantages of the shelves
The main advantages of wall shelves at the desk are their low cost and convenience of construction. There are many ideas for placing a shelf for the schoolchild over the table, the photos of which can be seen below.
The corner shelf will perfectly complement the interior and will be comfortable for children's use.
Over time, shelves can be replaced or supplemented with a book rack. The choice of such structures is great. In this case, corner products can also be used.
It may be necessary to have shelving systems or even several corner shelves, because apart from the educational literature, the child will need ordinary books that need to be placed somewhere.
Thanks to the presence of shelves in the children's room of the schoolboy an additional place is formed. Several original corner shelves framing writing desks can become a highlight of design.
There are many different design ideas, a great option - corner furniture organizers. Items can be used as a kind of cabinet or screen to separate the schoolchild's workplace from the rest of the territory. Organizers with offices of the same size, located at the desk, look best.
The workplace will be even more popular with the child, if you decorate educational materials with decorative objects and unusual things.
In the interior of the room, girls can be installed on the shelves of vases with feathers or beaded flowers, the option of design with colorful balls is ideal for children.For decorations, you can also use desks.
A capacious half-open rack can successfully separate the entrance hall from the living area, replacing the usual wall.
Why do I need shelves
The question of the need for shelves in the student's room remains relevant. Sometimes parents when planning children's rooms consider shelves a relic of the past, which takes up too much space.
If you do not think about the problem, it may seem that they are right. Instead of printed materials, people now prefer to use electronic means to read books. Therefore, the need for cluttering the interior of the room with bookshelves and shelves disappears.
It is difficult to argue with this, speaking about the room of an adult schoolboy. In the case of the child, it can be said unequivocally that any bookshelves in the nursery, including angled ones, are a must. The decision to buy or make a bookcase or desk with shelves is more than advisable.
Choosing a shelf for the student
Choosing a shelf for books, you need to take into account a few nuances. Remember that the user of the product will be a child. Consequently, it will be loaded with many more items than several textbooks. In some children's rooms the books are placed on several shelves. For this reason, you need to purchase products with increased strength.
Often in schoolchildren's books are not placed in even rows, but they are folded, therefore strong side walls are very necessary. Otherwise, the textbooks will periodically fall on the floor, the surface of the desk, or they may touch the child's head instead of keeping it.
When considering design and creative ideas, remember that in the priority of the interior the capacity and functionality of objects. Often modern products look chic, but only a few books can be placed on such a shelf. For the rest of literature, the place is simply not there. Therefore, even a small assortment of shelf designs suggests a choice in favor of a simple, but roomy subject. Then you can come up with a version of the decoration or other decoration to give the product a more presentable look.
The choice of the bookshelf for the student's desk should be based on the type of fastening system of the product. It is on this factor that its reliability and guarantee that the shelf, including the corner, does not injure the student unexpected fall from the wall depends.
Each of us wants to make his house comfortable and beautiful. To do this, you need to repair and order comfortable furniture. It is very important to avoid clutter. The room in which you live is a place to store a huge number of things.
The most valuable shelves will help you to save many items. They can put books, souvenirs and much more.
However, such furniture often has one negative feature ─ an ugly fastener. Therefore, the so-called floating shelves become very actual in our time. They differ from ordinary ones in that their binding to the wall is completely invisible.
We want to give our readers several ways to use attractive frameless shelving from Laura Gaskill, a designer who emphasizes the emotional aspects of the house.
One of the options for decorating the kitchen's window space is the modification of the crossing shelves. There is always not enough space in this room. It is logical to use an additional gap of the wall.
Floating racks give you a surplus storage area and, at the same time, they do not interfere with the windows to let light through. You can easily carry out such an installation, and then fill the shelves with dishes. It will look amazing, breaking the sun's rays.
If the house has free corners of unusual shape, then they will be very appropriate original shelves. Each case must be approached individually. This idea is perfect for recessed arches, in which you can not put other furniture.
In some cases, use the bias method. Alternate the alignment of the furniture elements hanging on the left and right on the wall. Have open shelves asymmetrically. In gaps of double height, it is convenient to put high objects.
An interesting variant of a four-story frameless rack at the junction of two walls. You can also soften and round the corner. You see that the shelves located in the living room are smoothly "flowing" into the corridor.
Install a long, soaring in the air rack to use the perfect opportunity and demonstrate art and antiquities. It represents three distinct dark lines above the desk.
We recommend a variant of interesting design of home office. To the left of the window on the side wall you see two massive floating shelves. Between the lower projection and the working plane of the table is inserted a panel of cork. It is durable and wear-resistant, has a strong and elastic structure.
Conveniently, it easily deforms, and then returns to its original form. To such a surface, it is convenient to pin up sheets of paper, postcards and reminders. From the ceiling hang three miniature lamps. They perfectly illuminate the workspace.
On the three walls, located in front and on the sides of the desk, you can fix one wide and two narrow frameless shelves. Thus, the table remains practically free, and all magazines and books will be higher.
The ideal place to store glasses and wine glasses can be three small shelves, located directly above the two-tier glass trolley bar.
The one who runs the kitchen, it is nice to realize that all necessary and often used items are at hand. Therefore, we recommend to build a 3-storey shelf with invisible fixtures above the kitchen table.
Cups, saucers, plates and coffeepots ─ here is not a complete list of dishes that can comfortably settle on it. The design of the kitchen is designed so that the brown shelves perfectly match the wood of the furniture facade. They contrast with the white countertop and the same color tiled walls.
To fix these unusual shelves, you need to have a certain experience, so that they stay long and do not collapse.
- First, determine the location where you want to install the object. Investigate the reliability of the wall. The thickness of the brickwork must be at least 25 cm, if the wall is concrete, then more than 10 cm.
- Take care of the manufacture of shelves. The ultimate goal of your creativity should be a kind of box, five sides of which you must create. With a saw, you can cut two identical pieces of plywood of the required length. They will become the upper and lower part of the furniture attribute.
- Next, another strip of the same length and width of 3 cm should be sawed. This is the future facing of the end part. Then you need to cut two more strips: one ─ 3 cm wide and the other ─ 0.6 cm smaller. Grind them carefully. Drill holes in the right places, and then glue these strips together.
- Cover the wood with paint, and on top with a layer of varnish. You can paint the whole block of shelves with one color that matches the decor of the room, or make the shelves colorful.
- The bracket nailed to the wall will be the sixth side of the box. It is a solid bar that will hold the entire shelf. Fix it, without forgetting to use the level, and then attach the shelf to the wall with the studs.
- Prepare all the materials. Understand the device. The fastening includes such components as a hinged bracket, a fastener element and a steel rod.
- Determine what will be the thickness of the future shelf. It is important that it does not bend or deform. Therefore, we recommend to maintain this figure at a level of 3-6 cm.
- Use the recommendations of your designer, who will give additional advice on all the issues of interest (style, color, shape).
- Wood must first be well dried and treated with antifungal impregnation.
- Measure the interval between the two holes.
- The next stage is the marking of the wall. Do not forget to use the level to ensure the horizontal direction of the furniture attribute.
- On the resulting axis, place the fastener element on top.
- Drill a drill hole at an angle of 90 degrees relative to the wall.
- Remove from them excess dust and debris and hammer in the base for the dowels. You can use wooden stakes instead.
- Then, using dowels, screw the fastener elements to the plugs.
- The next step is the final installation of the shelf. With incomplete landing on the fastener element, you need to tap it with a palm or a special rubber hammer. For a uniform installation and to avoid skewing, tapping should be done from left to right.
- Check if there are no backlashes. If everything is normal, then consider that you have completely coped with the task.
An effective complement to the interior, along with furniture and textiles, are various accessories. Gift souvenirs, close to the heart of the photo within, favorite volume of poems, a collection of funny little animals or houseplants must be placed somewhere. To help come all kinds of wall shelves, whose main purpose - the storage of small items. Having become acquainted with the design features of the shelves and the stages of manufacturing simple models, it will be easier for you to choose an additional element of the design of the room.
Types of wall shelves
An important task in the selection of wall shelves is the combination of practicality and the successful performance of the decorative function. To understand the variety of structures will allow their classification. By appointment, the products are divided into the following types:
- Kitchen shelves for storing spices or small items of decor (original mugs or exclusive plates). Usually such shelves are not very wide and have miniature edges.
- Bookshelves are present in the homes of book lovers or families with pupils.
- Shelves for the bathroom. A mandatory condition for their production is the use of moisture-resistant materials. As a rule, this glass combined with chrome parts or plastic.
- Universal shelves allow you to place on them indoor flowers or a variety of souvenirs.
Place the wall shelves as follows:
- Most often they are mounted directly on the wall. Brackets or corners are used as fasteners. Fixation is carried out in a secret or open way.
- Elements for fastening the hanging shelves can be belts, ropes or chains using anchor hooks.
- Angle specimens are installed between adjacent walls. The mounting options are similar to standard wall designs.
- Decorative gipsokartonnuyu niche harmoniously complement the built-in shelves.
The wall shelf designs have the following features:
- The horizontal plane fixed perpendicular to the wall is called the console.
- The product can be equipped with walls from the sides or from behind.
- Multi-tier shelves are a kind of shelving.
- Combined models with vertical and horizontal walls.
- Decorative specimens. Usually they do not carry a functional load, their main purpose is space zoning or the role of an additional design element.
If desired, wall shelves can be made of a closed type, additionally equipped with glass. This option is practical with the rare use of objects stored there and their lack of decorative value. In other cases, the design is made open.
Material for the substrate and fixing methods
The following materials can be used as a basis for wall shelves:
- Natural wood species or its derivatives (particleboard, gypsum board, MDF, plywood, etc.). The use of such material in the self-manufacturing of wall shelves guarantees the absence of processing difficulties. The finished product looks impressive and its operation time is long enough.
- Plastic for wall shelves is often used in the bathroom, it is versatile. In industrial conditions, they can successfully simulate the appearance of a stone or a tree.
- The choice of metal as a basis for wall shelves may be due to several reasons. In the first case, the weight of the placed objects is extremely large and a robust construction of the wall shelf is required. The second way - an exclusive forged product, emphasizing the respectability of the owner. The desire to show originality leads to the creation of wall shelves from metal pipes, which are appropriate when looking for a loft-style room.
- Transparent glass shelves successfully create an atmosphere of lightness. Working with such materials at home is extremely difficult, so it is better to choose the finished design of a glass wall shelf.
Advice! Filling the drywall niche with shelves from a similar material, take care of placing there non-heavy items.
To fix a wall shelf it is possible differently. The choice depends on the design and the surrounding interior. The easiest way is to use loops, the ease of installation is different from the metal corners. Heavy wall shelves should be mounted on brackets. There are various devices for fixing glassware. Fans of non-traditional combinations will like the forged decoration of the wall glass shelf.
Self-made
The most convenient for work is wood material. Having manifested a fantasy, you can make an original wall shelf that is most suitable for a particular room and objects stored on it.
Important ! When choosing boards, pay attention to the key points: the wood should be dry, free of mold, voids, cracks and ideally flat.
In most cases, to create a wall shelf, in addition to the main material, you will need:
- drill and hacksaw;
- sander;
- level, ruler and pencil;
- brackets or hinges;
- self-tapping screws, dowels;
- stain and varnish, as an option the hanging shelf can be treated with a primer and painted.
Classical form
Consider the process of manufacturing a simple wall shelf suitable for storing books.
The dimensions of the future design: length - 110 cm, height - 25 cm, width - 16 cm. Actions include the following stages:
- Markup. Laying the boards horizontally, they carry the dimensions of the selected drawing of the wall shelf.
- Saw a board. For work it is practical to use a jigsaw that ensures accurate and perfectly smooth cuts. As a result, for a shelf, you need two short and two long blanks.
- Material processing. The application for the wall shelf of natural wood provides for the preliminary grinding of the boards. Then the blanks are covered with stain and varnish. If you want to give the interior bright colors, the future shelf is treated with an antiseptic primer followed by painting.
- Assembling the wall structure. On the lower board, having deviated from the 0.8 cm slices, two parallel lines are drawn. The holes for the screws are drilled on the marked lines with an indent from the edge of 5 cm. The upper board for the wall shelf undergoes similar manipulations. After preparing the holes, all the parts are assembled together.
- Brackets for the wall structure are fixed on the ends of the side elements. The grooves are drilled in the wall, the dowels are twisted with a projection 0.5 cm apart. Then, with the help of self-tapping screws, the brackets are fixed to the wall.
If necessary, the rear wall is covered with a sheet of plywood, and the shelf is made of a closed type by inserting glasses. By this principle, you can build all kinds of models of wall shelves. For example, by making several blocks that differ in size, the shelves are placed on the wall in staggered order.
Angular variations
Rational use of space provides corner wall shelves. Their design is also diverse. Combined models contribute to the economy of the material, where the fastening of the multi-tier construction of the wall shelf is carried out by using a chrome-plated metal tube. Fans of creative solutions will appreciate the idea of using the outer corner of the room under the built-in shelves.
To make a simple model of a corner wooden wall shelf can be as follows:
- The details of the upper board are processed at the ends with an adhesive compound and clamped with clamps.
- A similar procedure is carried out with the lower board of the future shelf.
- After the glue dries, a stain or a primer is applied to all elements of the wall shelf.
- The top and bottom parts are marked with fastening points and holes are drilled.
- The side walls are attached and fixed with screws.
- The brackets are fixed in the end, and the shelf is installed between adjacent walls.
Hinged models
Always fresh and interesting look hinged models of shelves, where straps, ropes or chains are used as fasteners. The basis of this design in most cases is also the tree or its derivatives. A hanging shelf on the ropes is done like this:
- The board is sawn according to the chosen dimensions.
- At a distance of 2-3 cm from the edge with the help of a drill, 4 holes are prepared on each shelf of the future hinged structure. The diameter of the hole corresponds to the thickness of the decorative rope.
- The rope is threaded through the prepared holes and tied to the knot on the underside.
The remark! Make sure that the length of the decorative rope is the same on all sides of the hanging shelf.
The remaining ends of 4 ropes are joined together and hung on an anchor hook fixed in the ceiling.
The original element of interior design, made in a rustic style, will be hinged shelves, where straps are used as a fastening. The number of shelves can vary, the length of the belts is calculated on the basis of the distance between the shelves and the height of the attachment, followed by multiplication by two. Drilled holes in the straps and the wall, non-ordinary fastenings are fixed by screws or nails. You can also use nails to fasten the shelves between the belts.