Print this page
The problem of protecting a private area from unauthorized entry is also a question of installing a fairly cheap fence. Over that, which fence is cheaper, almost every landowner thinks about it. But the decision to reduce the cost of the fence can not go against the solution of other problems. Fencing should not only be cheap, but also:
- strong,
- reliable,
- aesthetic,
- easy to clean.
The total cost of any fence consists of several factors:
- length of the fence (which perimeter is planned to be closed),
- material from which the fence is erected (the cost of forging, for example, is slightly different from the price of corrugated board),
- constructive features of the fence to be erected (the foundation device will necessarily make any construction more expensive.
Cost of fence from corrugated board
Hedges of corrugated roof cover private property in about half of Russians. And it's no accident. Tired of the infinite leisurely neighborly curiosity, the owners of the plots tend to cover their property more tightly.
Approximately every second master believes that he is able to assemble the fence from the profilist himself. And this is true if you know some of the nuances of construction and choose the right material. 
At first. You can not take too thin sheet. A thin proflist will blow the wind. In a few weeks he will bend and the fence will lose its appearance. Too thick corrugated board is quite expensive. The sail of such a fence will be high and strong winds can easily loosen even deeply concreted supports. Therefore, you need to buy sheet thickness of 0.5 mm.
Secondly. Do not fasten the sheet close to the surface of the soil. The gap is needed not to reduce the sail, but to ventilate the upper soil layer, which tends to rot.
Thirdly. Supports fencing from the profiled sheet must be buried and concreted not less than half a meter. Step support should be between 1.5 and 2.5 meters.
And the last. Take sheet with a polymer coating. Of course, many owners zinc-plating seems closer and more familiar. But the quality sheet obtained by hot dip galvanizing is produced only in Russia and in Europe. And the market is now full of sheet produced by the Chinese and obtained by the method of cold galvanizing. Such material will not last long. Quality galvanized road. Therefore - the best option is a polymerized sheet.
The approximate cost of a fence made from corrugated board is from 1100 to 1300 rubles per running meter.
Cost of fence from the rabitsa
This is the cheapest fence. Everyone knows this. But not everyone knows that modern technologies for assembling and installing fences make this fence not only the cheapest, but also the most durable and reliable. Fulk fences are good for protecting the site from the sides. Combined fencing, where the facade is closed with something dense and high, and the side parts of the perimeter are enclosed by the rabitsa, will significantly save the owners of the facility. 
There are several types of fences from the grid:
- fence from sections (each section is closed by a rabitsa),
- the fence is made of a corrugated mesh (it looks like a fence fence, the only difference being that the bars of such a grid can be bent in different directions), such a fence can have between supports up to 5 meters,
- welded wire mesh (this is an excellent vandal-proof fence), it is somewhat more expensive than a slab, but cheaper than other types of fences.
The cost of the fence of rabitsa is from 360 to 630p per running meter.
The cost of a wooden fence
A wooden fence is not just an old fence made of thin perches, painted in the last century. A wooden fence these days can be:
Among other things - wood - a fairly cheap material. Of course, if the fence is not assembled from elements carved from a red or ebony tree.
A wooden fence can be of the following types.
- Fence. The height and width of the bars of the fence can be such that to close the perimeter not only from unauthorized penetration, but also from immodest looks.
- Fencing in the style of "ranch". Plank in such a fence is not vertical, but horizontally. This fence can also be quite high and dense.
- Wattle. This decorative fence is not only cheap, but also beautiful. Wattles can be quite high.
- Latticed fences. Such fences have ceased to be exotic recently. Latticed sectional fences can have a variety of shapes and heights.
On average, the cost of a wooden fence ranges from 2 to 3.5 thousand rubles. per running meter. But this is provided that the fence will be two meters high.
Cost of fence brick
This is the most expensive fence. More expensive can only be forging. But brick fences can stand for centuries and need no repairs. Such a fence speaks about the well-being of land owners. 
Under the brick fence, a foundation is necessarily provided. Most often this is a ribbon type of foundation. It must be equipped with a blind. It will allow to remove water from the fence and protect the brick from destruction due to dampness and mold formation. Fence posts are necessarily reinforced with a metal pipe, which must be buried below the freezing level of the soil.
Despite its high cost, a brick fence can reach a height of 2 - 2.5 meters. Very often the pillars of the brick fence are decorated with decorative lanterns or figured tops. The top of the brick fence is equipped with forged elements or simply put barbed wire. Some landowners let the current through the wire. This enhances the vandalism of the fence. The cost of a brick fence ranges from 9150rub. up to 15150rub. per running meter.
Want to order a quality and inexpensive fence?
Call us right now or order a call back!
Each owner of a private house or suburban site carries out fencing of his territory. In this case, there is a desire to make a fence of quality, but do not spend significant funds. Which fence is the cheapest, it is possible to calculate, you only need to estimate the material cost and the amount of work.
Fencing made of wood is one of the most economical
The most common options
Despite the abundance of modern materials, which can easily be purchased at any construction store, wood remains the most popular. It is available to everyone, in addition, it has a huge number of positive qualities. The advantages are low price and simplicity in processing. The fence of it will be the most different configuration and sizes. If desired, it can be done both deaf and open.
Note! Such a fence for aesthetics and prolongation of life is usually covered with varnish or painted with paint of any color.
Solid fence
The second fence of the budget variant can be made from the grid-rabitsy. This fence is suitable in the event that there is no need to hide something. The material completely transmits light and does not create a shadow. This is an ideal option for a garden and a garden. The cost of it is low and accessible to everyone. Installation work is carried out quickly and easily. Such a fence will last for many years, while it does not require special care.
Skips the light and does not close the review
Not so long ago a new kind of fences appeared in the shops - PVC panels. This material has a lot of advantages, which make it so popular. The first advantage is the variety of colors and textures. Panels are very resistant to the effects of the environment, even after a few years will not change its appearance.
Stylish and inexpensive
No less popular and in demand among owners of houses is a corrugated board. He is able to serve for decades and not lose any positive quality. To mount it, you do not need special skills, the main thing is to perform all the work step by step. The material is most often attached to a pre-prepared metal frame. The only expense of money in this case is the foundation pouring.
Profiled sheeting
To buy profiled, suitable for the construction of fencing, it is worth familiar with some of its characteristics. The first thing to pay attention to is a variety. There are only three:
- The wall is characterized by a wave height of not more than 20 mm. It can be safely used to erect a fence.
- Roofing proflist has a wave height of 20 to 44 mm. This group is considered an ideal option for the fence.
- The carrier is used as a supporting element, the wave height in it can reach 160 mm.
Also it is worth paying attention to coloring. The sheets can be simply galvanized or coated with a polymer coating. The color scale is wide enough and without special difficulties it will be possible to choose the most suitable variant.
Original solution at an affordable price
You can decorate your site by making an interesting fence, which will cost quite inexpensively. A braided fence is made from a vine and has positive qualities of wood. In order to make such a fencing, it is worthwhile to conduct some training, because the first time you can not get the expected result.
An interesting version of the "hedge" hedge
Regardless of what material will be chosen for the construction of the fence, it is very important to make a reliable frame on which it will be fastened. Metal parts for prolonging the service life are recommended to be painted, this will prevent the beginning of corrosion. Wooden columns of the frame when deepening into the earth must necessarily be treated with bituminous mastics, or other waterproofing materials. They protect the wood from moisture and rotting processes. Having studied all the materials and their features, you can determine exactly what is the cheapest fence for giving and choose the best option for yourself.
Before the owners of suburban areas, in addition to work on the arrangement of the house, there are other tasks. For example, ennobling the territory. Approaching this problem closely, many of them are wondering which fence is cheaper to put on their site.
After all, not all have sufficiently large budgetary funds to establish a solid design, but at the same time everyone wants to protect their territory from unauthorized penetration by outsiders and superfluous looks from the street. In addition, even the most primitive fence will protect the yard from drafts and wind.
Note!First of all, the price of the fencing is affected by the price of the material from which it is built. Therefore, when considering the cheapest options, we will pay attention to the most budgetary materials for fences.
Popular materials:
- rabitz;
- wood;
- profiled sheeting;
Structures made of wood
Wood is considered to be the most budgetary material for making fences.
Wooden construction
It has many advantages:
- The lowest cost.
- Easily lends itself to any kind of treatment.
- Does not require the use of specialized professional equipment and special skills.
- The process of installing the fence is not time-consuming.
Note!This type of raw material allows you to create fences of different configurations and sizes. You can paint the product in any shade.
The disadvantages of such fences include the need for regular staining, as well as vulnerability to fire and humidity.
There are many variations of designs that can be created from wood: starting with fences, which are woven from twigs and thin twigs, finishing with a palisade of logs.
The most practical option - the fence of edging boards. Lumber in the market is represented in a wide variety. To create a fence, it is recommended to take items with a height of 1.8 meters.
Constructions from other materials
On the second place at the cost are the fences, made of a grid.
In the market this material is presented:
- rabitsa;
- corrugated products;
- products of welded type.
Products from the grid
Rabitsa is considered the cheapest option of the grid, which can be used to install a fence in the country. She does not need such frequent care as wood. But with its durability, this kind of material also has disadvantages: the mesh sections do not create a shadow and do not cover the area from drafts and views from the street.
To compensate for this disadvantage, many summer residents use a net fence as the basis for creating a hedge of climbing plants.
Fences made of PVC have become popular relatively recently, but today you can often see this type of fence in suburban areas.
PVC construction
Advantages of PVC fencing:
- durability;
- a wide range of products, including various options for color and textural solutions;
- low level of cost;
- does not require special care.
Fences made of PVC are absolutely not afraid of sunlight and do not deteriorate under the influence of moisture and cold. Unfortunately, not all shops can offer materials for creating such fences.
Profiled sheeting today is also popular, like wood, although slightly more expensive. It has excellent technical and operational properties.
Products from profiled sheeting
Advantages of structures made of corrugated board:
- do not need constant care;
- screen foreign noise that can be heard from the street;
- can use as temporary and permanent fences;
- durable and practical.
The disadvantages of such fences include the need to pour a concrete foundation, which will entail additional costs. Therefore, fencing made from corrugated board is the most expensive of budgetary structures.