If it is decided to make a fence from the profilist around the countryside site or private house, it will be useful to get acquainted with the tips, how and what to choose the corrugated board for the fence.
Recently, the profiled sheet has turned from an inconspicuous zinc-plated bent metal profile into an attractive material with a wide range of color shades, textures and configurations. And this is just what lies on the surface.
How to choose a corrugated board for a fence? Which is better, worse? What are the parameters of the corrugated board that determine exactly for the fence. Is it possible to use roofing profiled on the fence? These and other issues will be considered within the scope of this article.
The first thing to consider is the parameters of the fence itself:
- length;
- height;
- skeleton.
These are three whales, on which all further calculations of the corrugated board are based and have a direct impact on the choice.
Second, determine the duration of the operation
The service life (temporary or permanent) is an important moment, which, along with the fence itself, will determine the budget for the installation. The cost of fencing from the corrugated board can depend on the parameters of the fence, which is difficult to change, and the price of profiled sheeting, which is determined by the quality of the metal profile (which in turn affects the estimated period of operation of the fence).
From this point of view, the corrugated sheet fence may be temporary (fencing of the construction site) or permanent (fence near the house). The longer the fence is supposed to last, the more scrupulously it is necessary to approach its choice.
What kind of fencing for a fence is better to choose
To make a choice and use correct material, you need to evaluate the main parameters:
1. Coating of corrugated board
Like any metal - corrugated board, which is based on an iron core, is subjected to corrosion processes. To slow down the process of appearance of rust or pre-empt it, the corrugated sheet is covered with special coatings, the type and thickness of the application determines the cost and service life of the corrugated board.
In the market there are two types of corrugated board, each of which has varieties:
Without decorative coating
3. The thickness of the corrugated board for the fence
The most controversial of the parameters. The fact is that the thickness of the profiled sheet directly affects the strength of the fence.
What is the thickness of corrugated board to choose for a fence?
Sellers are advised to purchase a thicker metal - 0.5-1 mm. However, masters and many users agree that a reliable frame is able to compensate for the small thickness of the profiled sheet. In terms of the cost and laboriousness of the work - this is a controversial issue, but the fact that the sturdy frame is able to level the sheet's sail and gives it rigidity is unequivocal.
Therefore, the most optimal thickness for users is 0.45. Taking into account the permissible GOST 24045-2010 and EN 10143 deviations of +/- 6 mm. in fact it is 0.39 mm. Nevertheless, professional fitters give a guarantee on the fence with such profiled sheeting.
How to check the thickness of corrugated board?
The seller must provide all sheets for thickness measurement. With regard to the thickness of the zinc coating, there are three options - either to believe the word to the seller, or to require documents on the bay of metal, from which rolled profiled. Again, you need to remember that the documents can be on one bay, and the rental is made from another. The third option is to give a sample for analysis to the laboratory. But the installation of the fence from the corrugated board with your own hands is not such a large project to spend resources on analyzes.
4. The color of the corrugated board for the fence
Color does not affect the strength characteristics of the fence, but it determines the visual appeal and affects the price of corrugated board.
All manufacturers (except Ruukki (Finland), which use the color layout of RR) use the standard Ral table to designate the color. Thanks to this, profiled sheeting of different manufacturers is designed in one color scheme.
Which color to choose for the fence?
The question is rhetorical, but according to statistics, among favorites - 8017 (brown), 3005 (rotten cherry), 6005 (green), 6002 (light green).
Today, the popular solution is the use of corrugated board with prints with a pattern for wood, brick, stone, etc. Profiled Printech with imitation looks very advantageous in the finished product. And the decor, in the form of columns, columns or forged parts, only adds to the fence of solidity and prestige.
Note. It is important to know that any coating is exposed to ultraviolet radiation, that is, it burns out. But, the quality coverage burns evenly. By the speed this process can be compared with the burning out of paint on the car. However, in the case of sheet replacement, a difference in shades may be noticeable. Even buying a sheet "just in case" will not save the situation.
Glossy or matte corrugated board - another point that determines the appearance of the fence. Matte surface looks more noble, but it loses its appeal after the rain, because dirt from the ground settles on the surface of the fence. Such sheets should be placed on the foundation or permanently cleaned. It's not the attraction of the fence, but the fact that fine dirt particles increase the rate of destruction of the sheet coating.
To properly choose profiled sheet for the fence, you need to pay attention to a few more nuances:
- appearance of sheet. Large deviations in width, length (over the permissible GOST 19904-90) should be alarmed when buying (substandard);
- quality of the front surface. Peeling, blistering, stretching, scratches - all this will lead to the destruction of the surface and the inevitable corrosion. Dents do not cause much damage to the proflist, but also do not decorate the appearance of the fence;
- cut quality. Typically, the length of the sheet is set at the profiling stage. The guillotine cuts the metal sheet smoothly, without jaggies. Use of a grinder or other cutting tools gives an uneven cut - this is a direct road to the appearance of rust in the place of cutting;
- geometry of the covering wave. It should ideally lie on the wave of the previous sheet. It is not necessary to believe the seller's statements that the sheet will be pressed with an additional self-tapping screw. Sheet fastened to the sheet, and not to the frame, the screw will not hold, and install an additional support or a lag - costly;
- film availability. It is not an obligatory attribute, but it will protect the sheet from damage during transportation;
Council. After the installation of the corrugated film is necessary to remove the film. After it cools to the surface, the film is practically not amenable to removal.
- warranty and other accompanying documents.
Note. If the calculation of the amount of corrugated board is carried out by the seller, he must provide a layout sheet. This is especially important when roofing works, as well as in the construction of a complex fence.
Accounting for these factors will help to make right choice fence corrugated board and avoid the situation shown in the photo.
Agree, a convincing example, why not save on buying profiled flooring.
Material prepared for site www.site
How to choose the right corrugated board for a fence - video
The price of corrugated board for a fence
Proceeding from the above, it can be concluded that the price of corrugated board is an objective value determined by the thickness, type of coating and the quality of the finishing layer of the sheet. Profiled sheeting, whose value is below market, by definition can not be qualitative.
Advantages of the fence from the corrugated board
- strength;
- maintainability;
- almost any form;
- relatively low cost;
- resistance to bad weather and mechanical damage;
- beautiful appearance and the ability to combine with other materials (well combined with stone).
In addition, from the corrugated board is possible, because it is not exacting in installation and maintenance.
For many years in a row the fence from the corrugated board is at the peak of popularity. This is not surprising, because such a design can reliably protect your site from the constant attention of neighbors and other unauthorized persons.
The excellent characteristics of this fence are due primarily to the features of the profiled sheet. Metal profile is steel sheets, which have a relief surface. They have durability and excellent load-bearing capacity. In addition, the corrugated board is very resistant to various external influences. Doubts in the high quality of the profiled sheet can not be, because it is manufactured in accordance with GOST with observance of all standards. This fence was very popular not only because of its excellent performance indicators, but also at a low price in comparison with other types of fencing.
As for the profiled sheet itself, these are cold-formed corrugated sheets. It provides the proflist with rigidity and strength. Profiled sheeting can be installed in any direction: both in vertical and horizontal. They can carry out external and interior decoration buildings. Profiled sheets are classified by several indicators:
- By appointment:
- For fencing;
- For floor covering;
- For wall fences (partitions).
- The zinced covering. Perfectly protects the corrugated sheet from the appearance of rust and bad weather conditions. This corrugated board is cheaper and is often used in places where it does not matter what kind of appearance the roof or wall will have.
- Polymer coating. The peculiarity of such profiled sheets is the possibility of staining in different colors. The most popular is polyester coating.
If we return to the advantages that distinguish a fence from corrugated board, then among them one can distinguish:
- Durability of operation.
- A wide range of shades according to the special RAL table. Profiled sheeting can be the most diverse design designs and colors. And this is a big advantage, because such a fence will ideally be combined with the landscape and architecture of your site.
- The possibility of ordering sheets of different sizes both in height and length. This may be due to some irregularities on the site.
- Such a fence does not require special care. From time to time you will only have to wash it with plain water. This can be done with a conventional garden hose.
- Profiled sheeting resistant to temperature changes. He can withstand even the most severe frosts and extremely high temperatures. Therefore, this material is perfect for installing fencing in any region.
- Affordable cost. If to compare with other materials, then the corrugated sheet is distinguished by a low price.
- The ability to install a fence quickly. Mounting the fence from the corrugated board is several times simpler and faster than other similar products. In addition, if you need to replace some of the design elements, then it will be quite simple.
- Noise insulation, protection from dust and prying eyes of your site. This is justified by the fact that the corrugated board is a solid fence made of metal, which easily keeps sounds and dust.
Price for fences made of corrugated sheet zinc-coated sheet "turnkey" (sheet thickness 0,4 mm, per running meter, material + work):
| Height, m | Price |
| 1,5 | from 782 rubles. |
| 1,8 | from 905 rubles. |
| 2,0 | from 1020 rubles. |
Cost of fences made of corrugated board with one-side polymer coating "turnkey" (sheet thickness 0.4 mm, per meter, material + work):
| Height, m | On 2 crossbars | On 3 crossbars |
| 1,5 | 1010 rub. | 1090 rub. |
| 1,8 | 1025 rub. | 1105 rubles. |
| 2,0 | 1050 rub. | 1130 rub. |
| Height, m | On 2 crossbars | On 3 crossbars |
| 1,5 | 1065 rub. | 1145 rubles. |
| 1,8 | 1085 rub. | 1165 rub. |
| 2,0 | 1110 rub. | 1190 rub. |
* This price is not a public offer, please check with our managers for the exact price.
The final cost of the fence from the corrugated board for the turnkey "turnkey" you can find out from our managers who will gladly answer any questions and will acquaint you with Shares and Discounts.
To the fence of the proflist, we propose to additionally order:
Fence production from corrugated board
Anyone who wants can easily order a fence of profiled sheeting in Moscow and Moscow region from specialists of our company. By taking your order, the masters of the company Nimaks-Story will take up the fence. In addition, it is possible to make and install the fence "turnkey". Thin sheets of steel have passed all the necessary stages of machining, galvanizing and have anti-corrosion properties. After that, the sheets are applied with a polymer coating for resistance to all external influences and attractive appearance of the fence.
The client can choose the brand of corrugated board, which will differ in characteristics and price policy. The most affordable brand is C-8. Such material is strong enough and capable of withstanding varying degrees of load. The cost of fencing from the corrugated board will depend on what material you chose and its characteristics, as well as on the size of the fence itself.
Construction of fences from profiled sheets for dachas:The professional team of our company will start the construction of the fence at a convenient time for you. All necessary materials, profiled sheeting and tools will be delivered to your site. After the specialists will start to work.
Initially, the plot is marked, several holes are being drilled. The received grooves are set up posts, and after - lags, which form a kind of link. After these stages profiled in a certain direction. At the end of the work, the quality and correctness of the installation of the fence must be checked. Only then does the ready work surrender to the customer.
The fence from the corrugated board must necessarily be built by professionals in this field. Even if you always and everywhere are trying to do everything yourself, do not forget that the erection of certain structures requires special skills, knowledge and tools. If the whole design is illiterate, then in the end you can get a fence that will collapse after the first strong wind.
Having ordered the installation of the fence from the corrugated board in the company Nimaks-Stroi, you will receive:- Fast and professional installation by a high-class team of craftsmen;
- Reliable and stable metal construction;
- Excellent protection of your site from noise and dust;
- Guarantee for all installed structures;
- A qualitative and beautiful fence at the most favorable prices.
Our company works only the best and most professional equipment of the latest generation, which guarantees an excellent fixation of the fence and all its constituent elements.
Combining all the above characteristics and benefits of corrugated board, it is worth emphasizing that such a fence is a universal and practical structure that has attractive appearance, economy and capital. He has no weaknesses and is perfect in every way. All indicators of the fence made of corrugated board make it the most popular and popular in almost any field of human activity. This fence easily fits into any environment and will be its neat complement.
Therefore, if you want to get a reliable, presentable and solid fence, then without any doubt, give preference to the fencing of the corrugated board. Such a fence is easy to operate, does not require special care from you and will serve its masters for many years.
Photogallery: |  |  |
|
 |  |  |
|
 |  |  |  |