You decided to make repairs in the toilet yourself. Naturally, you dream that everything in the end looks beautiful and aesthetic, but also practical and functional.
The first thing that catches your eye in the toilet is a lot of different kinds of communications (hot and cold water pipes, wiring, sewerage). All this "splendor" you want to hide from your eyes, while not losing the amount of an already tiny room.
There is nothing impossible, even if you do not use the help of specialists, but do it yourself. Do not worry if you do not have knowledge in this area. We will be happy to help you get them. It is important that all pipes and units are in perfect condition, or replaced with new ones to avoid possible leaks.
Types of closings
You can only hide pipes in the toilet room with your own hands in two ways.
First
Install additional structures, which are divided into the following forms:
- Falsh - wall (mounted in the toilet rooms with a relatively large area). Usually it is put behind the toilet. Thus, it closes the sewer pipe both in the corner and below. And the space above the toilet is used as a locker.
- Slanting false wall (installed in small toilets). A feature is the location of it at an angle.The inner surface of the materials used should not come into contact with the pipes, and the face surface should not be already an inspection hatch.
- Square box, distinguished by height:Floor to ceiling (usually used to hide risers);With the upper horizontal surface at different levels - multi-level. In ready form are used as additional shelves. This device not only preserves space, but also makes it more functional.
Second
We hide the pipes in the toilet using the strobing method.
In other words, we make grooves in the wall itself with a perforator and a drill. This is a very laborious process, but it allows you to save maximum space. There are certain parameters here, from which you can not retreat:
- The diameter of the pipe is not more than 50 mm;
- Deepening in the supporting wall is no more than 15% of the total thickness;
- Technology will not allow you to hide the pipe and riser toilet;
- Installation of inspection hatches.
What materials can I use
Choose what you need to install the box, no problem. Now there is a huge variety of finishing materials for every taste and purse. It remains to be decided how to hide the pipes in the toilet, using the most reliable and high-quality.
We present to your attention the most modern and budgetary ones:
- Plastic panels.
- Their advantages:
- Do not need additional finishing;
- Absolutely not exposed to moisture (but require constant care, they must be periodically wiped dry);
- Easy to attach to the frame;
- The most optimal price-quality ratio.
There is also a very significant drawback - low strength. During installation and operation, be careful.
Laminated HDF (high strength boards):
- Moisture-proof;
- Resistant to various types of damage;
- Long service life.
The only thing - you can not decorate them with tiles.
Is it possible to hide pipes in the toilet room with plasterboard? Of course, but there is one significant nuance - it must certainly be moisture resistant.
This material:
- Practical and easy to use (it is simply cut with a knife, self-tapping screws are easily screwed into it);
- Suitable for laying tiles;
- Does not swell;
- Easy to dry.
So that it does not collapse from the inside, tightly seal all the cracks.
One of the latest fashion trends in the installation of boxes are shutters. They do not just hide the unsightly form of communications, but also:
- Allow to save well on the tile (cover completely the wall);
- Provide quick access in an emergency situation;
- They have noise insulation.
- Do not require installation hatches.
You can hide not only the pipes in the toilet with shutters, but also isolate the water meters from prying eyes.
The technology of creating a box (an example of plasterboard)
It can not be said that everything is simple, and no difficulties await you during the creation of such a masterpiece as a place for toilet communications. However, sharpness and skillful hands can well cope with this. In the installation of such a design, we rely on the main stages:
Prepare the tool:
- Roulette;
- Shurupovort;
- Perforator;
- Self-tapping screws;
- Knife;
- A hammer;
- Dubelgvodi.
We will make measurements.
It is necessary to measure the width, depth and length of pipes installed in this room. To the width we add 7 cm.
On a note. See how to hide the toilet pipes yourself, using plasterboard, you can on numerous photos on the Internet.
Then we do everything on shchagam:
- We collect the details. For the internal fasteners the zinc-plated profile (UD 27) is suitable.
- Furniture or wood screws accurately connect the profile and details.
- Prepare a place for installation. We will remove the garbage, we will remove the rust and we will perforate the pipes if they are iron.
- To the walls or ceiling we mount the perforator and dowels with a profile (CD mark) in two planes. The distance between them is 50-60 cm.
Important! Installation of the box with their own hands is done before the ceiling and walls are finished.
Finally, we attach the finished box to the frame with screws.
In the description, all the nuances are difficult to take into account. Therefore, on the topic, whether it is necessary to hide the pipes in the toilet, we present a video review from which you will draw the right conclusions.
Hide the pipes: video instructions
If you do not dare to make such a design yourself, do not be upset. Modern supermarkets offer already made copies of polystyrene and plastic. They are assembled according to the instructions easily and simply into the finished frame.
July 25, 2016
Specialization: master of interior and exterior decoration (plaster, putty, tile, drywall, lining, laminate and so on). In addition, plumbing, heating, electricians, ordinary cladding and expansion of balconies. That is, repair in an apartment or house was made "turnkey" with all necessary types of work.
There are three most effective options, how to decorate the pipe in the kitchen, in the bathroom or in the toilet - it is decoupage, stroba and the manufacture of the box. And here there can already be a variety of methods, differing in technology and technology execution. Let's try to figure it out and see a visual video in this article.
Stoyaki, sunbeds and heating - decoration
Method 1 - decoupage
Perhaps, decoupage is the easiest way to decorate. Any teenager can develop his fantasy here.
Possibilities for decoupage:
- begin with the explanation of the designation itself - découper is a verb and is translated from French as "cut something";
- therefore, how to decorate the gas pipe in the kitchen, the riser in the toilet or in the bathroom, as well as the heating beds here is reduced to their finishing something;
- you can glue anything - metal, wood, various objects up to bottle stoppers;
- in addition, for this there is any type - you can apply some drawing or mix the pattern with inlay and so on;
- you can still use curly plants - let them be alive or artificial, the main thing is that you create the appearance of some kind of creeper.
Method 2 - hide in walls
In the photo - pipes for water distribution
I can tell from personal experience that the best option for decorating any pipeline is its complete absence, that is, hiding pipes in the floor, wall or ceiling. However, sealing of communications in plaster or masonry is a more labor-intensive process.
The pipe fits into the strob, and then plastered. The depth of the gasket depends on the diameter - the larger the cross-section, the deeper you will have to cut the channel, besides you need to take into account the fixing methods, which can be different and occupy different spaces.
It is rather difficult to do this work, and most of the problem consists not in physical work, but in dust, because you will need to cut the walls with a Bulgarian. As a rule, two lines of the required depth are made, and then the remaining middle band is selected by a perforator, a conventional chisel in the impact mode.
The instruction will not be special, but you'll have to swallow dust, which is very inconvenient, especially when there are furniture items nearby, and indeed, if repairs were not planned.
In order to cut mineral materials such as brick, concrete, plaster, you will need a diamond-coated disc. There are several options here, but again, based on personal experience, it's best to do this not with corundum, but with diamond-plated steel discs. Their price is slightly higher, but the effect is excellent.
Method 3 - box or false wall
Frame for the formation of false walls: 1 - wooden slats; 2 - water pipes; 3 - sewer riser; 4 - water meter
Another way to decorate the pipes in the bathroom, toilet, kitchen, is the arrangement of false walls or boxes of plasterboard, plastic panels and other finishing materials that are mounted on a frame or lathing. The essence here is to close the liner pipeline in any position - horizontal or vertical.
Still important here is that you still have access to the stop valves and to water devices - a water meter for hot and / or cold water.
And now let's see more specifically how to decorate heating pipes, water pipes or sewage systems, if you do not install them yourself, but they already have a louse. That is, here you are just getting out of the situation, adjusting to the current situation.
If you, for example, just need to close the pipes and / or sewage pipes in the toilet, then you will need a doffer for the false wall of plasterboard or for any door.
Such a frame can be made either from metal profiles that are used for gypsum board (CD, UD, CW, UW) or from wooden racks, for example, 50 × 50 mm. Here, it's not the price of the material that matters, but how you can easily assemble them.
Personally, in such cases I prefer wood - it's much easier to attach to (no need for brackets). In the schematic drawing, which is shown above, you can see that the bars are screwed around the perimeter. The jumpers are installed through 40-50 cm, but at the same time the hatch zone is strengthened for access to the stop valves and water meter.
A little different will look like editing, how to decorate pipes in the toilet, bathroom or kitchen, if you need to make a box. By the way, it can be both vertical and horizontal. The difference is that the design here is remote.
That is, the profiles of the frame are attached not only to the wall, but also at a distance from it, using jumpers and brackets. As consoles, metal perforated suspensions (Peshki) are usually used here, which are easily mounted to any rigid base with screws and dowels.
The principle of fixing gypsum cardboard to the frame for the box remains the same as for the general finish. The distance between the profiles should not be more than 50 cm, and the fixation points by self-tapping screws should be 30-35 mm.
1.
2.
3.
4.
In the construction of a residential house or major repairs in the apartment there are always works that are somehow connected with the installation of sewer pipes. And often after installing them, the question arises of how to close the sewer pipes in the toilet. About how to hide the sewer pipe in the toilet, and will be discussed in this article.
Installation of sewer pipes in a box
The most reliable and qualitative method of camouflaging sewer pipes is laying them in a box. To do this, it is necessary to lay pipes in the open way, and only then proceed to disguise. To perform this work, you need to create a framework of wood or metal corners. All this construction will be fixed to the wall with screws, and the connection of the elements of the box itself will be performed by self-tapping screws (read: "").If necessary, you can close the sewer pipe box of metal profile. This will require a waterproof plywood or plastic panels, and the frame can be plastered with plasterboard. In any case, from whatever material the sewer pipe box is made, it must necessarily be removed so that it can be accessed at any time to the sewer pipes.
Before closing the sewer pipes in the toilet, you need to prepare tools.
For the work will be required:
- building level;
- roulette;
- bulgarian with a disc for metal or wood (depending on the material);
- screwdriver.
Piping sewer pipes in the wall
Before you hide the sewer pipes in the bathroom, installed in the wall, you need to make them the appropriate shtroby. To do this, you need to use the Bulgarian, equipped with a special disk.
- Using a frame covered with any suitable material and lined with ceramics.
- Closing the pipes with thermal material.
- Using roller shutters.
Mounting the design in the kitchen, it is better not to hide it directly into the wall. If this option is the most suitable, then you will have to arm with a perforator. To close the sewer pipes in the kitchen, special sleeves or polyethylene film, combined with plastic panels, are good. To date, stores abound in such materials, and they can be selected even by color and aesthetic qualities, not to mention the device. Creating a design using plastic panels is also beneficial in that it is almost impossible to disassemble them. In order to close the water meter, it is enough to install a self-made hatch.
A good and effective method of masking the sewer is the use of roller shutters. As a rule, such devices are supplied with detailed instructions that will facilitate the installation and allow it to be performed as quickly as possible. The shutters have a long service life and good strength, so you will not have to change them in the near future.
Sometimes there are several non-standard situations, adjusted to which, you can hide the sewer pipes, with little or no additional effort. For example, if the bathroom has a small area, you can do the redevelopment, during which the sewer pipes will be hidden behind a special podium or hidden in a niche made of plasterboard. Such a unique box for sewage pipes will perform its function perfectly.
How to close the pipes with tiles in the toilet
You can hide the sewer pipes behind the wall from the tile. To realize this idea, you need a partition of moisture-resistant plasterboard, fixed on a metal frame. The strength of the partition must be high enough to support the weight of the tiles glued on it. The dimensions of the resulting opening should be sufficient for repair work.
Close this opening can be a makeshift hatch. It can be hidden, and then there will be no signs on the wall that there are pipes behind it. If desired, you can make an overhead hatch: for its manufacture you will need metal, and the door will be closed by means of a magnetic lock, which can be purchased or assembled independently. Read also: "".
Features of concealed stowage in the bathroom
Before closing the sewer pipes in the bathroom, you need to pick up all the necessary materials and tools. With tools usually there are no problems, but materials can ask some unpleasant questions to a person who has no experience in construction.
At once it is possible to tell, that elements from pig-iron stand not so expensively, but also they can serve not for long. Copper and steel structures are more expensive, and in this case, the price is justified: the life of structures of these materials is quite high. Using plastic materials, it is necessary to take care of good thermal insulation so that the sewerage does not become a problem in the near future.
Whichever method is used for sewerage sewage in the toilet, the following tips should be used:
- It is best to make a design of solid elements.
- At the joints it is better to use the same materials that connected the sewer pipes.
- Before disguising the pipe in the wall, it must be isolated.
Conclusion
Masking sewer pipes will make the aesthetic qualities of the premises a little better. Before closing the sewer pipe in the toilet, you need to make sure that they will be provided with good access in the future, otherwise the first malfunction of the sewage system will lead to disassembly of the part of the wall or niche in which the pipeline passes.