FASAD BATTS - rigid and dense heat-insulating slabs, resistant to deformations. They are made of stone wool based on basalt rocks.

APPLICATION

Plates of stone wool FASAD BATTS are used as a heat insulation layer in facade insulation systems with a thin plaster layer. The product provides not only thermal insulation, but also the basis for the application of the plaster layer.

Packaging

Plates of rock wool FASAD BATTS are packed in polyethylene film.

Dimensions

Installation

Plates FASAD BATTS are mounted using a special adhesive composition. Mechanical fastening is carried out by special dowels. The number of dowels is calculated by the developer of the facade system.

The price is indicated per m3 for a thickness of 50mm.
  A favorable price for mineral wool slabs rockwool frontage batts in the company Neotrade. Order it!

Error: the group does not exist! (ID: 1)

The main task of ensuring the thermal insulation of the building is the insulation of its walls. Up to 45% of the heat can lose the building with the wrong insulation. The comfort of staying in the room depends largely on the correct choice of insulation. The company Rockwool produces an excellent material, characterized by high efficiency, environmental friendliness, moisture resistance. Using slabs Komvul facade Butts as a heater will save money on the decorative design of the house.

What is the insulation Rockwool facade Butts

It is hard, dense, resistant to deformationmaterial of thermal insulation, made on the basis of basalt rocks by the method of special thermal impact on rock to obtain silicate melts. After processing, a material is obtained that has a huge amount of fibers arranged vertically, which contributes to providing the heater with the main performance characteristics.

Stone plates are used for insulation exterior facade, on which a plaster layer of small thickness is placed.

Technical Data Rockwool Front Butts

Stone wool is characterized by:

Mineral cotton wool is produced in the form of plates wrapped in a polyethylene package of two standard size rulers with a length, width and height of 1200, (500-600), (70-200) and 1000, 600, (70-200) mm, respectively.

The density of the upper and lower layers is 180 and 94 kg / m³  respectively. The degree of peel strength is more than 15 kPa, and the compressive strength of the material is up to 10% - 45 kPa.

Value water absorptionin case of total immersion less than 1.5%, and vapor permeability - μ = 0.30 mg / (m · h · Pa).

Mounting of stone wool to the walls is done using dowels, the number of which is determined by the developer of facade insulation. Cost  Rockwool wool in Moscow from 5500 rub./m³.

The popularity of this insulation is ensured by:

• materialmanufacturing, having a complex structure for technological execution: a rigid outer layer and a light inner;
• low weight;
• simplicity and quick installation;
• marking of the upper layer, the thickness of which is 25 mm.

Comparison of heaters

Today in the market of Moscow and the region there are many different heaters from basalt materials, it includes Technonikol, Izorok, Izovol, Thermolife, Rockwool, Ursa and several others. There are many heaters made of expanded polystyrene, mineral wool.

Heaters with their basic qualities are almost identical to each other. The price is formed from the cost of the work done in one place or another and transportation costs.

Overview of the Rockwool line

When comparing the technical characteristics of the insulation company Rockwool can be noted that they are approximately in the same row, their parameters are almost identical. However, there is modifications, providing certain requirements:

The Rockwool Heater is a European quality combined with economy and energy efficiency.

• Make Rockwool Kawiti Butts  Designed to provide the greatest degree of heat conservation. Plates are placed between the bearing walls, this prevents the formation of heat losses for a long time.

Any homeowner would like to have a house protected from adversity. Both housing and office should be warm and cozy, the cold and drafts in them are not the place. Take care in advance of reliable and high quality insulation.

The facade insulated with mineral wool has many advantages:

• good heat and sound insulation properties;
• the possibility in the process of warming to level the curvature of the walls;
• affordable material cost;
• protection against fire and the inability to settle in the insulation of rodents and other pests.

The most affordable and popular solution - buy facade heater rockwool, which you can not doubt. When the facades are warmed with stone wool slabs, the level of noise and vibration significantly decreases in the building, which has a positive effect on the integrity of the building and on the mental health of people.

ROCKWOOL ROKFASAD

Thermal insulation for facades ROCFASAD is used in the decoration and insulation of external walls of buildings (structures) for various purposes. The manufacturer claims that this modern material embodied the most advanced technical ideas. Application ROCFASAD reduces heat loss, provides the optimum level of humidity inside the building and the durability of external enclosing elements.

The ROCKFACADE thermal insulation showed its advantages under a thin plaster layer. All components of this material satisfy not only the European ISO quality standards, but also meet the strict climatic requirements of operation in the Russian conditions. Installation of ROCKFACADE plates is simple: gluing the insulation to the surface of the facade, its subsequent protection, finishing with a plaster reinforcing layer, decorative coating.

ROCKWOOL ROCKFASAD boards have exceptional heat and sound insulation, have high vapor permeability, are environmentally friendly, do not burn, are durable, resistant to atmospheric factors. They can be installed on high-rise buildings (up to 75 m) of all classes of fire safety. Best - plates Rokfasad.

ROCKWOOL ROCKWOOL FASAD BATTS, VENTY BATTS

The plates of FASAD BATTS and VENTI BATTS have different purposes:

• facade Butts Rockwool - the basis for plastering, the material is allowed to plaster not only on flat walls, but also on bay windows, pilasters;
• butts Rockwool - slabs embedded in hinged ventilated systems, contain water-repellent additives. They are also used as an outer layer if two-layer insulation is assumed. Plates are not a vapor barrier, formed inside the moisture unobstructed outward through them.

Comparative characteristics of materials taking into account subspecies:

1) ROCKWOOL FACADE BATTS is a rigid mineral wool board with a very high density (130 kg / m³). As well as ROCFASAD is used under the plaster layer. When you choose rockwool for facade price  in many respects it is determining: plates FASAD BATTS cost a little more expensive ROCFUSAD;
  2) ROCKWOOL FACADE BATTS D - two-layer hydrophobic combination. The outer layer of the plate is more dense (180 kg / m³), ​​and the inner layer is half lighter (94 kg / m³). Such plates reduce the load on the base, they are easier and faster to mount;
  3) ROCKWOOL VENTY BATTS is a rigid and dense hydrophobic plate (90 kg / m³) made using a synthetic binder component, but its density is much inferior to FASAD BATTS. Plates can be installed without wind protection;
  4) ROCKWOOL VENTI BATTS D - double-layer slabs (like FASAD BATTS D), have a more loose density (90 kg / m³ and 45 kg / m³).

Description of the technology of insulation with plates Rockwool (on the example of FASAD BATTS)

Let's say you bought façade insulation for plastering rockwool  FASAD BATTS of average thickness (100 mm).

The sequence of further steps is as follows:

1. Prepare for work - wear long-sleeved clothing, gloves, goggles, a respirator, and put tools "at hand".
  2. Align the walls, remove the protruding fragments, pins, etc.
  3. Pull the lower guide (socle) profile. Plate from the bottom up, positioning front insulation rockwool  horizontally and gluing to the substrate with special glue. Shift the joints in staggered order, additionally fasten each slab with facade dowels "umbrellas" (four pieces at the corners, one in the center), dowels, putty.
  4. Reinforcement is the next stage. For this purpose glass-cloth mesh is the most suitable, it is easily glued with a special reinforcing compound.
  5. Then proceed to priming with a fix primer primer and apply decorative plaster with subsequent painting of the facade, i.e. do the finishing work. Use facade paints, mix them strictly according to the instructions, maintain the drying time of the layers.

And in conclusion about the factors affecting the cost of facade insulation materials. When you buy fasade heater rockwool, price  The packaging depends on the size and thickness of the plates. The thicker the plate, the more expensive it is - this pattern can be traced to any Rockwool product.

Under the plan the device of a plaster facade? It's time to stock up a quality and reliable insulation. Use basalt slabs with double density The Buttes D Extra façade and you will reduce to 65% of the total heat loss in the house and extend the life of the building structures.

What is a Rockwool Warmth Facade Butts D Extra

This heat-soundproof hydrophobic plates of increased rigidity, made of stone rocks of the gabbro-basalt group. The main difference is in its combined structure: a soft and light layer from the inside with a density of 95 kg / m3, which provides a high level of heat preservation and hard outside with a density of 180 kg / m3, protecting the heater from deformations and external factors. Such a structure provides the material with the highest operational properties. The top layer is marked, which simplifies installation.

The facades of Butts D Extra, which you need to know about before buying

Where will the Facade of Batts D Extra show itself as effectively as possible?

The insulation is specially designed by the best specialists of Rockwool for the construction of wet plaster facades in various construction sectors: civil, industrial and commercial. But the main area of ​​use of Facade Butts D Extra - is the thermal insulation of the walls of country houses and cottages.

Due to the double density, Butts Facade panels improve the thermal insulation properties of the facade system, reduce the consumption of fasteners and putties, reduce the load on the structure and increase the speed of installation.

Packaging

Mineral wool plates from basalt wool FASAD BATTS D Extra are sold packed in polyethylene film.

Dimensions

The thickness of the upper (dense) layer is 25 millimeters.

Useful brochures

Specifications