[Click on the photo
for increase ]
One of the unconditional leaders in the Russian market of building materials is the company Vetonit, its products can be found in every construction shop.
Among the most popular Vetonit products are dry building mixtures, which are specially developed compositions based on cement, polymers and organic gypsum for high-quality and reliable processing of walls, floors and ceilings.
Read also: Dry plaster mixes. Apply correctly Cemented dry plaster mixtures are used for finishing baths, saunas, swimming pools, kitchens
Classification of dry building mixtures Vetonite
Dry mixtures Vetonit, depending on their functional purpose are divided into:
Plasters that can be either cement or gypsum based. The area of their application is the decoration of walls and ceilings in rooms of different humidity levels.
Vetonit plasters have high coating strength and are suitable for leveling the surface, as well as sealing deep cracks and other mechanical damage to the substrate.
Putty.
This category includes many dry mixtures of Vetonit suitable for finishing the walls and ceilings, as well as surfaces made of plasterboard and mineral materials. Depending on the field of application, the composition of the mixture can be made on the basis of both organic and polymeric materials.
Mixtures for floor leveling.
Vetonit dry mixes of this class are designed to create a smooth and durable floor covering that can be used for the device of warm floor technology, creation of decorative liquid floors, and also as a basis for the subsequent laying of linoleum or laminate.
Adhesive dry mixes.
This line of dry mixes Vetonit includes a number of glue bases for the installation of building materials such as ceramic tiles, marble, decorative stone, as well as concrete blocks and bricks.
Grout.
These building mixtures are used to fill the installation joints when working with ceramic tiles, marble or granite.
Read also: Dry concrete mixes - application features Dry concrete mixtures are widely used in the construction and repair of buildings and roads due to their high quality. They also expand the service area of concrete plants.
Features of application of dry mixtures Vetonite
All dry mixtures of Vetonit are applied to a specially prepared surface, from which the crumbling fragments of the old coating are previously removed. Dilute the mixture with warm water in accordance with the instructions attached to them, taking into account the characteristics of the base material, as well as the thickness of the coating applied.
All dry mixtures of Vetonit are applied to a specially prepared surface, from which the crumbling fragments of the old coating are previously removed.
The solution can be prepared both mechanically and manually, after which it should be allowed to stand for a few minutes before use. It is not recommended to dilute immediately a large amount of the mixture due to the short residence time of the solution.
Finish putty Vetonit on the adhesive binder is designed for finishing walls and ceilings in dry rooms.
Areas of use
Walls and ceilings inside dry premises. Suitable bases for putty Vetonit: all smooth surfaces of mineral materials; gypsum surfaces; walls and ceilings from plasterboard slabs. It is also possible to treat ceilings from other plates, for example, from particle board or porous fibrous boards, by spraying.
Technical data
| Colour | white |
| Water resistance | non-waterproof |
| Aggregate | limestone,< 0,3 мм |
| Binder | organic glue |
| Working temperature | during the work on leveling the temperature of the substrate, mortar and room should be above + 10 ° C |
| Water temperature | not above + 40ºС |
| Time of use | for about 24 hours from the moment of mixing with water |
| Drying time | at + 10 ° C approx. 2 days; at + 20 ° C approx. 1 day, with good ventilation. The drying time depends on the thickness of the layer, ventilation and temperature. On the site, it is necessary to create such conditions that the leveling layer can dry up about one day from the moment of application. |
| Layer Thickness | at partial alignment: max. 5 mm; at full alignment: max. 3 mm per application |
| Consumption | approx. 1.2 kg / mg for the thickness. layer 1 mm |
| Necessarily. amount of water | approx. 10 liters / 25 kg of dry mixture |
| Strength of adhesion | with concrete\u003e 0,5 MPa |
| Packaging | bag of 25 kg |
Putty Vetonite on a polymer binder is designed for finishing walls and ceilings in dry rooms.
Areas of use
Walls and ceilings inside dry premises. Suitable bases for putty Vetonit: all smooth surfaces of mineral materials; gypsum surfaces; walls and ceilings from gipsokartonnyh plates . With the help of putty Vetonit can also be treated by spraying ceilings from other plates, for example, from particle board or porous fibrous boards.
Mixture Vetonit is not suitable for leveling floors and as a base or an adhesive solution under the tile. Not suitable for wet and wet rooms, such as saunas and bathrooms. Not suitable for sealing gypsum board joints.
Technical data
| Colour | white |
| Water resistance | non-waterproof |
| Aggregate | limestone,< 0,3 мм |
| Binder | polymer adhesive |
| Pot life of solution | 24 hours after mixing with water |
| Drying time | 2 days at + 10 ° C; 1 day at + 20 ° C with good ventilation; The drying time depends on the thickness of the layer, ventilation and temperature; on the site it is necessary to create such conditions that the plaster dry up within 24 hours |
| Consumption | about 1.2 kg / m 2/1 mm |
| Layer Thickness | maximum 2 mm with partial alignment. maximum 1 mm / 1 layer with full alignment. |
| Fraction | maximum 0.3 mm |
| Operating temperature of base, plaster and room | must be above + 10 ° C |
| Packaging | bag of 25 kg |
Vetonite - the name of the product line of the Saint-Gobain concern, the world's leading producer of building materials in the world, a French company with centuries of history. The production of "Saint-Gobain" is distinguished by its compliance with the high level of quality requirements and ecological harmlessness of the products produced. Dry mixes Vetonit on the basis of natural components, are developed taking into account the modernized construction technologies, and fully meet all the multi-purpose requirements and needs of the modern consumer of building materials:
- Beauty, aesthetic appearance
- The ability to carefully study the details
- Simplicity of the technological process
- Durability
- Ecological harmlessness
Products of the line "Vetonit" Saint-Gobain, allows you to make any repair work or construction, complying with all norms and standards of "euro-repair".
By the level of prices, the products of "Vetonit" are materials of the "business" class. But the durability and quality of materials justify the investment. In addition, the company "Gold Frame" flexible pricing policy and integrated procurement solutions, which can play a decisive role in budget construction. Delivery of original materials "Vetonit" is made in any region of Moscow and the Moscow region. For large parties, delivery is possible across Russia.
Technical characteristics "VETONIT KR"
| Colour: | white |
| Water resistance: | no |
| Aggregate: | limestone,< 0,3 мм |
| Binder: | organic glue |
| Working temperature: | during the work on leveling the temperature of the substrate, mortar and room should be above +10? C |
| Water temperature: | not above + 40С |
| Time of use: | for about 24 hours from the moment of mixing with water |
| Drying time: | at + 10C approx. 2 days; at +20? C approx. 1 day, with good ventilation. The drying time depends on the thickness of the layer, ventilation and temperature. On the site, it is necessary to create such conditions that the leveling layer can dry up about one day from the moment of application. |
| Layer thickness: | at partial alignment: max. 5 mm; at full alignment: max. 3 mm per application |
| Consumption: | approx. 1.2 kg / mg for the thickness. layer 1 mm |
| Necessarily. amount of water: | approx. 10 liters / 25 kg of dry mixture |
| Strength of adhesion: | with concrete\u003e 0,5 MPa |
| Packaging: | bag of 25 kg |
Technical characteristics "VETONIT LR"
| Colour: | white |
| Water resistance: | non-waterproof |
| Aggregate: | limestone,< 0,3 мм |
| Binder: | polymer adhesive |
| Pot life: | 24 hours after mixing with water |
| Drying time: | 2 days at +10 С; 1 day at + 20 ° C with good ventilation; The drying time depends on the thickness of the layer, ventilation and temperature; on the site it is necessary to create such conditions that the plaster dry up within 24 hours |
| Consumption: | about 1.2 kg / m 2/1 mm |
| Layer thickness: | maximum 2 mm with partial alignment. maximum 1 mm / 1 layer with full alignment. |
| Fraction: | maximum 0.3 mm |
| Operating temperature of base, plaster and room: | should be above +10 C |
| Packaging: | bag of 25 kg |
Dry mixes have recently become the main materials in the performance of masonry and finishing works. Trademark Vetonite A mixture that is known in the domestic market for a little more than 10 years has established itself as a supplier of high-quality building materials.
In the line of dry construction mixtures of this brand, the following compositions are presented:
Masonry works, which include high-strength astringent components in combination with fractional sand, mineral fillers and chemical additives;
- plastering mixtures for interior decorative and facade work.
- dry mixes for filling and flooding floors, levelers used for leveling bases before laying flooring (tiles, laminate, etc.). The diluted composition is evenly spread over the surface and, if necessary, can be reinforced with metal rods;
- shpatlevochnye mixture, for grouting small cracks and leveling the surface for further finishing;
- tile adhesives;
- waterproofing special mixtures used to create waterproof coatings in bathrooms, toilets, showers. They are also used to create external coatings that protect buildings from negative impacts.
If we compare the dry compositions Vetonite prices that are about twice higher than standard domestic materials, one must take into account that at first glance, the two identical mixtures actually differ in composition and in properties. For example, the standard putty is made on the basis of gypsum, and a similar mixture of Vetonite has the basis of polymer glue in combination with crushed limestone. Comparison of these two materials only by their price tag will in fact be biased. Putty Vetonit LR + has a number of advantages that traditional gypsum putties do not. Polymer glue is able to retain plasticity much longer than gypsum (Vetonit putty solution after water immersion is suitable for application within a week). Thanks to the filler (limestone flour), it is much easier to treat the scaled surface (all excess particles, crumbling, leave an even and firm surface). Polymeric binders are much more environmentally friendly than gypsum binders. Putty Vetonit has in the composition of up to 15 modifying additives, giving the material improved adhesion, strength, vapor permeability, elasticity and other qualities.
Among the wide selection of plasters presented on the market, construction mixtures Vetonit are very popular. The product of this trademark is of excellent quality and reasonable price. In Russia, it is produced by the branch of the international construction group "Saint-Gobain" "Weber-Vetonit".
Types and scope of application
The company "Weber-Vetonit" produces powder mixtures for a wide range of construction works.
In the market you can find the following types:
- "Vetonit Gypsum plaster";
- Primer "Vetonit";
- "Vetonit Dispersion";
- "Vetonite TT";
- "Vetonit EP".
Paste your text here
Depending on the type of plaster, it can be used to:
- create a decorative layer inside or outside the room;
- align the surfaces (walls or ceiling).
« Vetonit Gypsum plaster"Is used to level the surfaces indoors. It is a non-waterproof white plaster that can be applied manually or mechanically. The final result is a surface ready for painting.
Primer "Vetonit" (or plaster solution for leveling) is used for indoor work on concrete and brick surfaces.
« Vetonite EP"Is a non-waterproof plaster mixture on a lime-cement basis. It is most often used, as well as plaster, in order to equalize large areas in one operation. It is not recommended to apply it to weak calcareous and cement-lime bases.
« Vetonit TT"Is a waterproof stucco mixture on cement basis. Used most often for indoor work. This mixture is universal and can be used for plastering most bases.
On the market of building materials there are also decorative plasters of this company. It is recommended that you carefully read the instructions on the packaging before you purchase to get a quality final result.
Specifications
Comparing the characteristics of different types of plaster, it is easy to make an informed choice in favor of this brand or another.
Composition
Depending on the type of plaster, its composition is different. Thus, the structure of "Vetonit EP" includes cement and lime. The main component of the most common mixture of "Vetonit TT" is cement. The basis of "Vetonit T" is glue organic binders "Vetonit L" is a plaster on a polymer binder. therefore it is necessary to first study the composition of the mixture.
Colors
This product is intended mainly for subsequent painting, so neutral colors are provided: white, gray and light gray.
Layer Thickness
Vetonit can be applied by a layer of 2 - 10 mm, the maximum thickness is 3 cm. It should be noted that it may differ depending on the type of mixture. More details can be found in the following tables.
Adhesion (stickiness)
The plaster has a high level of stickiness. On average, the bond strength is 0.5 MPa.
Frost resistance, moisture resistance
Dry powder is frost-resistant enough. is he it can withstand 75-100 cycles of full freezing and defrosting. Therefore, this product is recommended in regions with a cold climate.
Paste your text here
Strength
The strength of plaster of different types differs slightly. So, the mixture on a gypsum base is less durable than on a cement base. On average, one month after plastering the surface can withstand a load of 6-8 MPa.
Having considered the technical characteristics, one can come to the conclusion that Vetonit is really an ideal material for interior and facade plastering works.
More information about the most common types of mixtures can be found in the tables:
| Basic plastering "Vetonit". Specifications | |||
| Brand name | « Vetonit V» | « Vetonit T» | « Vetonit L» |
| Binder | Cement | Organic Adhesive | Polymer glue |
| The thickness of the layer is completely equal. (mm) | 1–3 | 1–2 | 1–2 |
| The thickness of the layer is a partial equal. (mm) | 1–5 | 1–5 | 1–5 |
| Fraction (mm) | 0,6 | 0,6 | 0,6 |
| Operating temperature (degrees C) | 5 | 10 | 10 |
| Water flow rate (l / 25 kg) | 7–8 | 7 | 7 |
| Viability (h) | 4 | 12 | 24 |
| Drying time (days) | 1 | 1 | 1 |
Having studied the technical characteristics, it is possible to start the plastering works.
Preparations for work
It should be noted that solution should be applied at a temperature of +5 to +30 degrees. But if the package has an asterisk or there is the word "winter", it means that it can be used and at low temperatures from -10 degrees.
It is necessary to make breaks between applying layers for up to two days and only after that go to the next stage. A week after the finishing works the plaster gets 50% strength.
Surface preparation
The preparation of the surface largely determines the final result.
The order of the following:
- pre-clean the surface of dirt and level it;
- cut off the projecting corners;
- all unevenness should be fixed.
You can strengthen the base reinforcing mesh.
When plastering concrete surfaces, it is advisable to treat it with a primer so that the concrete can not absorb moisture from the mixture.
Preparation of the solution
To do this you need:
- in a container of 5-6 l, pour out the package (25 kg) of dry solution;
- knead the solution in room temperature water;
- mix until smooth. You can use a powerful drill to do this;
- after 10 minutes, mix the mixture again.
The plaster should be used within 3 hours.
Paste your text here
Work methods
Plastering can be done manually and mechanically.
When performing work manually, you must:
- apply the resulting solution to a pre-treated surface;
- sand it off with a sponge;
- fill in depressions;
- align the surface.
If it is necessary to apply several layers, it is best to allow the first layer to dry for two days, and then proceed to the next.
The procedure for working with Vetonit does not differ from the order of work with other types of plaster.
Advantages
This plaster is universal.
Among the advantages are the following:
- frost resistance and water resistance;
- non-shrinkable hardening and good adhesion;
- possibility of plastering manually and mechanically;
- low consumption;
- moisture resistance;
- application on different types of surface.
Products can be used on most known materials - concrete, aerated concrete, ceramic or silicate brick, foam concrete and so on, preparing the substrate for subsequent finishing with tiles, glass or plastic slabs, as well as for applying putty.
disadvantages
There are not so many shortcomings and they are insignificant.
The main ones are:
- the plastered surface dries slowly;
- sypetsja at zashkurivanii.
Thanks to numerous advantages and convenience in work, Vetonit is in demand in the modern market of building materials.
Given the advice of professionals, you can avoid problem situations.
Here are some of them:
- to increase adhesion (stickiness), you can use a special solution "Vetonit Dispersion";
- it is impossible to use Vetonit as a basis for tiling;
- tools and equipment must be cleaned immediately after each use.
Cost
The price for plastering Vetonite is quite high. Depending on the type, the price may vary. The average price is from 400 rubles. for 25 kg. The goods are packed in packs of 5 or 25 kg. It is recommended to store in dry rooms in the original packaging. Shelf life is 1 year.
More information about Vetonit products can be found in the video: