The fence forms the first impression of the garden plot. The solidity of the design plays into the image. External reliability indicates the security of personal space. Aesthetics emphasize the taste of the owner.
Inexpensive by default, a fence made of corrugated sheets with brick pillars is in demand in country and cottage villages. Installation technology, supporting frame and filling materials ensure solidity. Combinations of ceramic or sand-lime brick with profiled metal sheets create an individual style.
Advantages of fences made of brick and corrugated board
An iron fence with brick pillars is a permanent fence. It is installed for decades, is presentable and economical in terms of cost and maintenance-free service life.
The advantages of fences made of brick and corrugated board are obvious:
- Durability. The service life of profiled sheets made of carbon steel is more than two decades, and that of bricks is several times longer.
- Reliability. Profiled sheet is resistant to mechanical stress, strip or columnar foundation for pillars is durable and eliminates distortions due to ground movements.
- Practicality. Materials save appearance when serving in the open air and are not afraid of precipitation, direct ultraviolet rays, low temperatures.
- Accuracy. Professional brickwork has smooth edges and edges and is done different ways. A high-quality profiled sheet demonstrates minimal, invisible deviations from flatness.
- Versatility. The range of bricks and the color palette of polymer coatings of profiled sheets allows you to select solutions in accordance with the architectural ensemble and landscape.
A fence made of corrugated board with brick pillars two or more meters high blocks up to 70% of sounds from the street, which ensures peace and quiet in the house and on the property. The blind design protects from the views of neighbors and passers-by - what you need for privacy and relaxation. Sheets of corrugated sheets are easily replaced in case of accidental damage.
Fences made of corrugated sheets with bricks and imitation of other materials
Today, options for decorating corrugated boards with patterns of wood, brick and stone textures are available. Fences made from corrugated sheets with a pattern are much more visually advantageous.
Fences made of corrugated sheets with brick pillars from “Fence-Dacha”
Combined metal fences made of brick and corrugated board from “Zabor-Dacha” are affordable and time-tested.
We perform:
- Calculation of the amount of materials for spans, horizontal logs, pillars, foundations.
- Construction of a shallow monolithic strip or column foundation.
- Laying bricks around metal supports or installing hollow pillars.
- Assembling a frame from a profile pipe and horizontal logs.
- Protection from atmospheric moisture by means of special caps on finished poles.
- Installation profile sheets.
The price of a fence depends on the brand of corrugated sheeting, the type of brick and the total length of the fence. Competitive cost is the result of focusing on the interests of the customer. The speed of installation is a consequence of experience in masonry and installation, the absence of lengthy complex processes.
A fence provides security, defines boundaries and gives the area a finished appearance. Do you prefer to stay within budget but invite professionals? The Zabor-Dacha company will install a fence for you that can withstand design loads, protect and decorate the site, and does not require major investments in construction or additional costs during operation. The 1.5 year guarantee confirms that we know how to work efficiently.
A fence made of corrugated board with brick pillars is different high strength and reliably protect the area from the penetration of uninvited guests and animals, and brick pillars give such a fence a very rich and aesthetic appearance. When building fences for a summer residence, corrugated sheeting with a colored polymer coating (polyester) is usually used. It provides excellent corrosion resistance of the installed fence, attractive appearance and color schemes in accordance with the overall design concept of the house and site. Soil and polymer coating are applied to the corrugated fence by the manufacturer. The brick pillars themselves can be laid out of facing bricks of various colors and textures, clinker and ordinary building bricks. Next, such a pillar can be covered with decorative plaster or covered with decorative stone.
Advantages of a fence made of corrugated sheets
with brick pillars
- Reliability A fence made of corrugated sheets with brick pillars is a reliable barrier against thieves, unnecessary noise and prying eyes, as well as the negative impact of the external environment.
- Practicality Profile sheets have a polymer coating that protects the sheet from corrosion, is easy to clean from dust and dirt, and can be easily replaced if damaged.
- Durability Fences made of corrugated sheets with brick pillars have excellent resistance to corrosion and other external influences.
- Aesthetics The combination of profile sheets with pillars made of natural brick or stone gives the fence a very rich and aesthetic appearance, visually ennobling the area.
Materials and components for the construction of corrugated fences with brick pillars
- Types of bricks
- Profile types
- Color palette
- Pillar decor
- Caps
Profiled sheet S-20
A beautiful type of corrugated board for a fence. Has significantly greater section rigidity. It can be used in a thickness of 0.35-0.5 mm, especially when adding additional logs. 
Profiled sheet HC-8
The most rigid corrugated sheeting for a fence. When using such a profile, you can increase the spans between pillars and reduce the number of logs. Such a profiled sheet can be installed horizontally without crossbars at all. Such corrugated sheeting can be used in a thickness of 0.32-0.35 mm, especially when using additional logs.Facing brick
Clinker brick
Cost of a corrugated fence with brick pillars
The procedure for installing a fence made of corrugated board on brick pillars
- 01
Marking
plotWhen marking the site, we use a level, tape measure, pegs and string. At this stage of fence construction, pegs are placed at the border of the site, under the entrance group, as well as marking the levels of the foundation and brick pillars when there is a difference in the relief of the site.
- 02
Arrangement
foundationAt this stage we are digging a trench for the future strip foundation and separately make a foundation for each brick pillar. Then we install formwork made of laminated plywood, add a sand cushion, lay a frame of reinforcement and fill everything with concrete grade M200-M300, followed by vibratory compaction.
- 03
Brickwork
pillarsAt this stage, the brick pillars are laid. The brick is laid around a metal pillar 1.5 bricks wide. Thus, the column turns out to be 380x380 mm in size. When laying into a pillar, metal embedded elements from the corner are laid in advance. The internal cavity is filled with cement mortar. After masonry, the masonry joints are jointed to seal and give the joints a beautiful appearance.
- 04
Installation of decorative elements
The tops of the brick pillars are capped with decorative caps made of sheet metal in the same color as the corrugated sheet, or cast in concrete or alabaster. A metal casting of the same color as the corrugated sheeting is installed on the surface of the foundation.
- 05
Installation of metal frame and corrugated sheets
At this stage, horizontal crossbars are welded to the brick pillars, to the pre-exposed mortgages. The welds are cleaned and treated with a primer or paint, which provides anti-corrosion protection for the fence. Sheets of corrugated sheets are attached to the logs, overlapping one wave, using metal screws in every second wave.
- High quality Thanks to our own production, the use of high-quality materials and professional equipment, we always achieve high quality.
- 2-year warranty Thanks to our own production, the use of high-quality materials and professional equipment, we always achieve high quality.
- Competitive prices Since we work closely with domestic suppliers who provide us with discounts, we are able to maintain affordable prices for wood-look corrugated board fences.
- Stable budget After we draw up a budget plan and agree on it with you, the final amount will be approved. This means that there will no longer be any additional costs included in the estimate.
- Delivery of materials Our teams are fully staffed. We cover all costs for delivery of materials to your site. All you have to do is call and order fence installation.
- Convenient payment options Our company provides various payment options. You can pay us directly at the site or through any Bank of Moscow office using a bank card.
- Manager's visit We can organize a team visit to your site at a time convenient for you. At the site you will be able to sign an agreement, after which our specialists will begin fulfilling the order.
- Fence on credit By contacting us, you can order a fence made of corrugated wood under a tree on credit. This program, beneficial for clients, was developed by us together with Bank of Moscow.
By ordering a fence made of corrugated board with brick pillars you will receive
When ordering the construction and installation of a fence made of corrugated sheets with brick pillars in our company, you will receive a guarantee certificate that will confirm not only the quality of the work performed, but also our legal responsibility. Consequently, we will provide you with post-warranty service for the installed fencing for two years.
Order the construction of a fence from corrugated sheets with a 2-year guarantee
Good afternoon I would like to express my gratitude to the Zaboroff company for their quality service. I especially thank the manager Ksenia Mishchenko for her attentive attitude and professional advice on the design, timing, and price. Everything was done right on time....
A brick fence looks luxurious and respectable; it will reliably protect the territory of a personal or suburban area from the penetration of strangers. Such fences these days belong to the elite segment and immediately indicate the high social status of the owner of the fenced area.
But the very significant costs that the construction of a brick fence will require are not always justified. Such fences look massive and somewhat monotonous and gloomy. They do not always fit into the architectural ensemble of a relatively small suburban or summer cottage. Combined fences with brick pillars and sections of corrugated board look much more attractive. This option is not only much cheaper than a brick fence, but also looks lighter and more elegant.
In combined fences, brick pillars have a dual purpose. In addition to their visual appeal, they significantly strengthen the structure of the fence. Fences with brick pillars are more durable and reliable than lightweight fences made of profiled metal sheets with supports made of metal pipes.
Brick fence with corrugated sheeting it looks elegant and presentable, complementing and decorating the architectural ensemble of the development of a personal plot, especially in cases where the facade of a suburban or country house made of the same brick.
But this is by no means a prerequisite. Brick goes well with almost all modern materials used for finishing facades. A fence made of corrugated board with brick pillars can be as diverse as the choice of types of modern facing bricks.
Brick fence with corrugated sheeting - photo of fences with posts made of various types facing bricks
Successfully performing an aesthetic function, brick pillars serve as stiffening ribs for the fence, ensuring its stability under the influence of any overturning forces.
An important decorative detail of such a fence is the profiled sheet from which the fencing sections are made. In addition to the fact that a modern profiled sheet can be of almost any color and shade, you can also use corrugated board for a brick fence, made using modern technologies photo offset printing.
Thanks to the advantages listed above, a fence made of brick and corrugated sheets is today one of the most common options used for fencing suburban and summer cottage areas. This is despite the fact that the materials used, e.g. facing brick, are quite expensive, and the process of erecting brick pillars is quite lengthy and requires high qualifications.
However, the result obtained will justify all the effort and money spent. Neat brick pillars will decorate any structure, emphasizing the taste of the owners of the site, and in terms of strength and durability, a combined fence can easily compete with a brick fence.
Installation of brick pillars for a combined fence
The height of brick pillars made of brick and corrugated board can be very different. It is chosen depending on the planned height of the fencing sections, and the post should be 100-150 mm higher than the top of the profiled sheet.
A very important characteristic of a fence post is its cross-section. Most often, the cross-section of the pillar is made equal to 380x380mm, that is, one and a half bricks. This section provides sufficient strength and stability of the pillar with the least consumption of materials.
It is better to lay steel reinforcement inside the brickwork of the pillar. This will increase the resistance of the pillars to bending loads. It is advisable to connect embedded parts with reinforcing bars using electric welding, to which longitudinal guides will subsequently be attached for installing the profiled sheet of fencing sections.
The brickwork of the pillars on which the gate and wicket will be installed is reinforced with steel or profile pipe. This is necessary so that they can withstand a fairly large weight of metal gate leaves and wickets.
On top, the brick fence posts are covered with special metal or concrete caps, which protect the brickwork from destruction, which is possible when the moisture that gets inside freezes.
In addition, these elements make the design of the pillars more complete.
It is very important to choose the correct spacing of the fence posts, that is, the distance between them. If you make it too small, the cost of the fence will increase significantly and its appearance will deteriorate; if the distance is too large, it will increase the load acting on the fence posts. Typically, the fencing pitch is chosen in the range from 2.5 to 3.5 m.
Fence made of corrugated sheets - brick pillars
As mentioned above, metal mortgages are installed in the brickwork of the fence posts. With a fence height of about 2 meters, they are placed at a height of 300 and 1600 mm from the fence base. After the brickwork has gained the necessary strength, horizontal purlins made of angle or profile steel are attached to the mortgages using electric welding.
A regular profiled sheet or a special corrugated sheet for a “Wave” or “Pika” fence is attached to the purlins using self-tapping screws for corrugated sheets.
Every owner own home wants to fence off its territory from curious neighbors and animals from entering the area. To do this, a reliable fence is installed around the perimeter of the site.
Today there are many options for fencing a site, but recently a fence made of corrugated sheets with brick posts has become increasingly common. This fence looks solid and very attractive, unlike other types of fencing. Building such a fence is not particularly difficult, and the financial costs for its installation are low.
The construction of a fence made of profiled sheets with brick posts is practically no different from the construction of a fence made of corrugated sheets with posts made of a metal pipe, but there are still some nuances. First of all, the owner must clearly understand the final version of the fence and calculate its dimensions.
You will also need to prepare necessary tool for work and purchase building materials.
The construction of such a fence includes the following stages:
- preparatory work;
- determining the size of the fence;
- construction of the foundation;
- frame installation;
- laying brick pillars;
- fastening the corrugated sheet to the frame.
Determining the size of the future fence
First of all, it is necessary to determine the size and location of the fence made of corrugated sheets with brick columns. First, the corners of the future fence are marked with pegs and a nylon thread is stretched between them. The length of the perimeter of one side of the site is divided into equal segments. Each marked place is indicated by a peg. In the future, support posts will be installed in the marked places.
Important! Brick columns should not be too wide, so their width on the side and front sides is only 1.5 bricks. If there is a sufficient amount of material, the masonry can be made in two bricks.
The width of the strip foundation should be 20-25 cm. The foundation will protect the territory from penetration by digging under the fence of animals. Typically, the height of the base is 10-25 cm. In some cases, sidewalk curbs are used instead of building a foundation. But it all depends on the preferences of the owner.
Construction of the foundation
To build a fence made of corrugated sheets with brick pillars, a strip foundation is used, the manufacture of which consists of the following steps:
- trench preparation;
- installation of formwork;
- pouring the foundation.
Preparing the trench
By general rule The depth of the trench must be greater than the freezing depth of the soil. As a rule, a trench is dug 40-80 cm deep, depending on the climatic conditions of the area. In the places marked with pegs under the posts, holes are dug or drilled for installing the pipe. The bottom of the wells is compacted with sand and the base of the column is inserted - round or square pipe. Depending on the height of the fence, a pipe of appropriate length is selected.
In progress earthworks a sufficient amount of soil is formed. The top fertile layer can be left on the site, and the rest of the sand is leveled along the fence or transported outside the site.
Important! When installing support posts, you must ensure that they are installed strictly vertically. You can check this with a building level.
Installation of formwork
The height of the formwork is chosen at the discretion of the owner, however, making it more than 25 cm above ground level is impractical. The formwork is constructed from semi-edged construction boards. If there is ready-made formwork, install it. To prevent the boards from bending under the weight of concrete, they are additionally fastened with wooden jumpers or pegs driven into the ground.
After installing the formwork, it is reinforced. For this, reinforcement rods are used, the diameter of which is 1 cm. The reinforcing rods are connected to each other with knitting wire, which will increase the strength of the foundation being built. Sometimes reinforcement cage collected from the outside and then lowered into the formwork.
Metal support pillars necessary to strengthen brick pillars. Optimal distance between pillars - 2 meters. To ensure that the pipes do not become askew during the process of pouring the foundation, they must be carefully secured in the well. To check the installation level of the pillars, a nylon thread is also pulled in the middle and on top, similar to the bottom one (which determines the height of the foundation). While pouring concrete, the verticality of the pillars is constantly monitored.
As a rule, the height of the fence is 1.5 meters. Hence, metal pipes for pillars, taking into account their deepening, should have a length of 1.9 meters.
Pouring formwork
To prepare cement mortar, crushed stone, sand, water and cement, preferably grade M 400, are used. In some cases, a plasticizing additive is added to the mortar to increase frost resistance. The ratio of sand and cement in the solution can be 1 to 3 or 1 to 4. It all depends on the brand of cement. The solution is mixed in a concrete mixer or manually until a homogeneous mass is obtained. Household liquid soap (plasticizing additive) is mixed with water. Only after the foam has settled can it be added to the solution.
The prepared solution is poured into the formwork, carefully leveled with a trowel and leveled to the level of the stretched nylon thread. The drying time of the foundation depends on weather conditions and is at least 3 days. Complete hardening of concrete occurs a week after pouring.
Frame construction
The stability of the future fence determines the quality of the frame. Its construction begins no earlier than 3 days after the foundation is poured. The construction of the frame can be done both before laying out the brick columns and after the construction.
The construction of the frame before the erection of brick pillars is carried out using a 20x40 profile pipe. The pipes are welded to the installed metal posts using welding. Horizontal pipes welded at a distance of 30 cm from the top of the column and at a distance of 15 cm from the surface of the foundation. It is recommended to coat the manufactured frame with alkyd paint, which will prevent metal corrosion.
In the second case, it is necessary to weld embedded metal plates to the installed pipes at a distance of 30 cm from the surface of the formwork and the top of the pipe, which are brought out outside the brickwork. In other words, the mortgages must protrude from the brickwork. After laying the pillars, cross members from a profile pipe are welded to the protruding mortgages.
Laying brick pillars
Facing bricks are used to cover the installed metal supports. Brick laying is done using cement mortar with a cement to sand ratio of 1 to 3. You can also add liquid soap to the mortar, which will improve its ductility.
The bricks are laid around an installed metal pole. Formed between the pillar and brickwork the gap is filled with solution. To strengthen the masonry, it is allowed to reinforce each two rows with a 50x50x4 mm mesh.
Advice! It is advisable to lay the pillars one by one: first lay the first pillar to a height of 50-60 cm, then the next one. This will allow time for the brickwork to shrink.
In places where profile pipes interfere with the masonry, the brick should be carefully cut with a grinder, then fit it under the pipe, carefully sealing all the cracks with cement mortar. To give brick pillars a finished look, special ready-made caps are installed on top or I make them myself from galvanized steel.
Caps purchased at a hardware store are installed on the mortar, and those made of galvanized steel are attached with dowels to the last brick row. Such caps can be painted to match the corrugated sheeting to give them beauty.
Fastening corrugated sheets
The final stage of building a fence with brick posts is attaching corrugated sheets to the frame. For this, galvanized roofing screws or special rivet nails are used.
Fastening, as a rule, is made in each wave adjacent to the crossbar. To do this, use a drill to drill a hole in the corrugated sheet and the cross member, after which a self-tapping screw is screwed in or a nail is pressed with a rivet gun.
The sheets are laid one on one with a slight overlap.
When the last sheet of corrugated sheeting is attached to the frame, the work is completed. Thus, installing a fence made of corrugated sheets with brick posts is not so difficult if you follow the stages of its construction.
A fence made of brick and corrugated board is a standard version of fencing, which was previously made mainly from wood. Now there is a large selection of fences made of corrugated sheets, which, despite their durability, have not lost their attractive appearance.
Fence made of brick and corrugated board: advantages
Corrugated sheeting is the choice of those who intend to create decent protection for their site, but at the same time do not want to see the neighboring site.
Features of the fence made of corrugated sheets ordered from Leader M LLC are:
- long service life,
- high level of strength,
- ease of maintenance,
- attractive design,
- slight windage,
- acceptable price.
Due to their excellent technical and operational qualities, fences are in demand throughout Russia. With their help it is easy to fence not only personal plot, but also public or industrial buildings.
Positive qualities of cooperation
The main activity of Leader M LLC is the production and sale of various types of protective fences. We present to our clients a wide selection of wooden and metal fences made from first-class and safe materials.
With us you will be able to choose a fence that will fit into the architectural ensemble of your home and at the same time correspond natural conditions. This is possible thanks to the qualified selection of materials, for which our specialists are responsible.
Become a client of Leader M LLC to buy durable fences at the most affordable prices!