A beautiful night light in the bedroom will create a favorable atmosphere and help children get rid of their fears. Such electrical appliances do not consume huge amounts of electricity and have a wide variety. Of course, you can buy a device in a store - but this is too simple; it is much more pleasant to make, for example, a night light from wood with your own hands.
Product safety
Before we look at how to make a night light with your own hands, you should worry about safety. On various Internet sites you can easily find various examples of decorative decorations and night lamps. With their help you can create various colorful visual effects.
The home DIYer can visit these sites and various forums to look for inspiration, but at the same time pay attention to the safety of power plans. There is an opinion that low supply voltage and low power of miniature light sources are safe, but this is not the case.
Yes, 3 volts for powering LEDs or the 12 V voltage required for a lamp bulb do not pose a direct threat when in contact with a person. But a short circuit may occur at the point of contact where an electric arc occurs, and current will flow through the wires, capable of heating the insulation to ignition temperature.
In this case, the power supply will operate in overload mode for a long time, and the circuit breaker will not respond.
When creating your own night lights and power supplies for them, you need to protect the wiring with a fuse.
After you have secured the electrical wiring at the output of the power supply, you need to secure the board itself by enclosing it in a housing.
LED night light
An interesting night light can be made from LEDs and a regular bottle. In addition, the process itself is quite simple and does not take much time. To create it you need tools and materials:
Let's move on to creating the lamp:
- The first step is to wash the bottle outside and inside.
- Then on the side, at the very bottom of the bottle, you need to drill a hole for the wires.
- Next, you need to pass the wire into the drilled hole and out through the neck.
- Strip the ends of the wire and make a knot 2-3 cm before the edge of the wire so that it does not fall out of the bottle.
- The next step is to cut off the plug from the garland and strip the ends.
- Then insulate the wires with electrical tape.
- Place the garland obtained in this way into a bottle. The neck remains open.
That's all, your DIY LED night light is ready.
Starry sky
The next night light, which can be made literally from scrap materials, will be the “Starry Sky” night light. Its main advantage is that it does not require a network connection. It works thanks to a small flashlight that is powered by regular batteries.
Necessary materials and tools: glass jar with a lid, foil, scissors, awl, metal tray, small flashlight. Procedure:
- The first thing to do is draw a diagram of the starry sky on the foil. To make it look beautiful, you have to try.
- Then, you need to place the foil on a tray and use an awl to pierce the stars drawn on it.
- The next step is to cut off the excess part of the foil. The height of the foil should match the height of the jar. You need to roll the foil into a tube and insert it into the jar.
- Place a flashlight at the bottom of the jar and turn it on.
Now you can enjoy the starry sky without leaving your home.
Lace lamp
An elegant device can be made using lace as the main material. Such a lamp will add individuality to the interior.
To make it you will need: a cloth with lace, a jar, threads and needles, a flashlight and scissors.
Main stages:
- It is necessary to wash the jar and remove the label from it.
- You need to wrap the jar with lace.
- The next step is to sew up the edges of the lace.
- You can place the flashlight at the bottom of the jar and enjoy the process.
Wooden product
A wonderful night light can be made from a simple log. It does not require a lot of materials and financial investments. Required tools and materials:
Step 1. You need to cut wheels from a log, and two wheels are larger than the others.
Step 2. Find the center of the wheels and drill through holes, and in two large ones - blind holes.
Step 3. Using sandpaper, we clean the wheels so that there are no splinters.
Step 4. It is necessary to coat the holes with glue.
Step 5. Then varnish the workpieces.
Step 6. Now you can install the blanks on the rail and pass the LED strip through them.
Night light with butterflies
This version of the night light is considered more feminine and would be more suitable for a girl’s room or for a romantic dinner.
Necessary materials for its manufacture:
- Wire 50 cm.
- 2 sheets of white paper.
- Glass/plastic jar.
- Candle or flashlight.
- Butterfly stencil.
Let's move on to production:
The resulting lamp will be an excellent addition to any interior.
Crafts made from tulle
The next way to make a night light is a tulle lamp. In this case, you will need: tulle, a round lampshade, a garland or flashlight and glue.
Manufacturing proceeds as follows:
- First of all, the tulle is cut into circles.
- Next, tulle is taken and folded in the form of a rose on the lampshade and fixed to it with glue. The tulle rose is glued only in the middle.
- This way the entire ball is shaped.
- A flashlight or garland is placed inside.
The result is a beautiful lamp.
In these simple ways you can build a night light with your own hands from scrap materials. Moreover, it only takes 5-10 minutes to make.
If desired, every Internet user will be able to find a large number of training videos that allow you to assemble original lamps that will decorate the room. In these videos, everyone can find the answer to the question of how to make a night light with their own hands.
Having studied the photo of a night light made by yourself, you can be convinced that such products look stylish, attractive and elegant, you will definitely have a desire to start making them yourself.
"Starry Sky"
By choosing this type of lamp, you can be sure that it will be ideal for the bedroom and children's room. To implement this idea, take a three-liter glass jar with a lid and cover it with foil. First, a switched-on flashlight is placed in the jar. Stars are cut out on the foil.
The night light is ready, which means you can start using it, receiving special pleasure and vivid emotions from the space-style setting.
Lace night lights are also quite popular. To create them, a piece of lace is fixed on the jar. A garland or lantern is also placed inside.
Fluffy night light
To create such a product you need to perform the following manipulations:
Many small circles are cut out of fabric (preference should be given to tulle or tulle).
Take a dry and clean lampshade, parallel circles of tulle and tulle are collected into a “rose”. Using glue, the fabric flower is fixed on the lampshade (while fixing the flower, you need to apply just a drop of glue to the center of the rose). This creates a fluffy ball.
A garland or flashlight is placed inside the lampshade.
This version of the lamp will fit perfectly into a child's room. If you wish, you can also involve your child in creating such a night light, this will bring him closer to his parents and significantly improve his mood.
Night light with LEDs - original and unique
If you decide to assemble a night light with LEDs with your own hands, you can rest assured that this solution will fit perfectly into the interior design of any room. The LEDs are connected to a piece of wire.
The two ends of the wire are connected to the finished board. At this stage of work, you must make sure that everything worked out and the night light really functions.
As for the plug with LEDs, it needs to be put on the tube. It often happens that the diameter of the plug is larger than the tube. Please note that in this case, you will need to make a seal.
Night light in the shape of a flower
The floral night light looks original, elegant and attractive. To create such a night light, any flowers are selected and inserted into the center of each color of the lamp
Here you can fully use your imagination, because you can arrange a bouquet not only in the form of a flower in a pot, but also hang it like a garland.
In any case, such a composition stands out for its originality and attractive appearance. You can watch instructional videos online that allow you to make similar products yourself.
Night light made from scrap materials. Peculiarities
It is quite possible to create a night light with your own hands from scrap materials, because the most important thing here is desire. Please note that such an unusual and original design solution will create a favorable atmosphere in the bedroom, and children, in turn, will be able to get rid of their fears.
For example, it is quite possible to make a night light from wood. All you need for this:
- log;
- sandpaper;
- saw;
- glue.
Wheels should be made from a log, two wheels - larger than others, using sandpaper, you need to clean them, then you can avoid splinters getting into your fingers. Now you should carefully coat all the necessary holes with glue.
The workpiece is varnished. All that remains to be done is to install the blanks on the rail, and then pass the LED strip through them.
If you want, you can always make a beautiful battery-powered night light yourself. We can safely say that it won’t take you more than half an hour to create such products.
You yourself must decide on the ideas that interest you most in order to bring them to life. Know that hand-made night lights always look original and attractive.
Photos of night lights with your own hands
Adults do not always have the desire to decorate a room, but for children they are ready to sacrifice time and create an original night light or lamp. Of course, you can buy some kind of device for yourself, but for the younger generation it is better to try and be smart. First you need to think about what you can make a night light from without much effort. For most simple models, ordinary materials and a set of tools will do.
How difficult is the manufacturing process?
In fact, this is an exciting task that you can involve your child in. Usually the production takes about an hour, but will bring great benefits to the offspring. And it will help the parent get closer to the baby.
Do not forget about this moment, since the son or daughter will be grateful to the adult for the time spent. To begin with, you can look at various photos on how to make a night light - it will become clearer.
What can be done?
Remember, the most beautiful night lights with your own hands are created more easily in a friendly family company. The theme of the product may depend on the child’s personal preferences. You need to find out from him what he loves most. It could be a cartoon, a movie, or the sea.
You can start from here, the main thing is that the craft is safe and provides the necessary functionality - it illuminates the room in the dark. Then the little person will be happy and you will not worry about the safety of using the created assistant.
Projector starry sky
This version is usually used most often because it is neutral and children like it. Various ideas and instructions on how to make a night light offer many ways to create this craft, and we will look at a few simple options. It will not require large financial and time expenditures.
You need to find a suitable jar and a battery-based flashlight. Although you will have to rely on an extensive set of additional materials:
- The jar must be made of glass and have a lid. We recommend looking for the cylindrical version as it is easier to work with;
- You will need a large sheet of hard foil to cover the entire area of the jar;
- Actually a working flashlight with batteries;
- Scissors with a convenient size;
- An awl to complete the creation of the night light.
It is necessary to cut a sheet of foil to place inside the jar. Holes are created on its entire surface using an awl. Now the included flashlight is sent to the jar and the starry sky is actually ready for night viewing. But, if this does not seem enough, you can cut out the outlines of Ursa Major and Ursa Minor on foil, since children love to look at these constellations. To do this, you need to check the real location of the stars and transfer it to the craft.
A night light in this style can be made in another way. A large tin can will do. It is necessary to remove the wrapper and perforate it with an awl in the right places to form constellations or stars that fill the night sky.
You can put a flashlight or candle inside. The last option will add a dose of romanticism.
LED lamp
It is clear that it will be based on LEDs. To complete the work of creating it, you will need the following materials:
- Transparent plastic tubes with different diameters, two pieces;
- LEDs with the required color and brightness;
- Volumetric plug;
- Set of glass stones;
- A little bit of wire;
- Reliable glue;
- Pliers for finishing the night light;
- Board for placing LEDs.
Now let's look at the step-by-step process of making a night light with your own hands, since this version is much more complicated. What should be done:
- Pliers will help you bend the ends of the LED bulbs enough.
- All LEDs are connected to the wire in a parallel manner based on polarity.
- The ends of the wire are connected to the board.
- Turn on and test the functionality of all connections. If the bulbs get very hot, then you need to add a resistor.
- A tube with a small diameter is glued into a larger one.
- Glass balls are poured into the resulting void.
- The plug with LEDs is placed on the tube. If the diameters do not match, you can use a sealant made of a convenient material.
- You can turn on a ready-made night light based on LEDs.
Conclusion
We conducted a master class on how to make a night light from ordinary objects. The first option is very simple, and the second is suitable for more advanced parents. Although in fact many other models can be made. It all depends on your imagination and capabilities.
Photos of night lights with your own hands
Note! 
Note! 
The night light of the bedroom creates a cozy atmosphere in the room before going to bed, and also makes it possible to perfectly navigate in the dark, which helps not to disturb those sleeping nearby by turning on sufficiently bright lighting. A night lighting device in the nursery will relieve kids from the fear of darkness. Such night lights consume a minimum of electricity and are distinguished by their variety.
In addition to its functional purpose, a night light is considered an integral part of interior design and creates various visual effects. The catchy design of the children's lighting makes the room mysterious and fairy-tale-like, and the lighting in the bedroom in half tones adds intimacy.
Own design of night lights
Modern stores offer a huge variety of night lighting devices of various designs, for different tastes and at any price.
And not in every case is it financially justifiable to create such devices with your own hands; however, their design gives scope for turning creative fantasies into reality without spending a lot of money. That is why anyone who wants to make their home interior original can create a night light with their own hands.
In the process of designing light, in comparison with basic lighting, where the same distribution of light flux is necessary, the main emphasis is on the competent combination of a number of factors through which visual perception is formed:
- device shade;
- light refraction, as well as its decomposition into shades;
- scattering and reflection of light flow;
- combination of colors and visual effects.
Starry sky on the ceiling surface
To create such an LED night light, you can do it yourself by projecting patterns onto the ceiling surface.
For similar purposes, a projector designed for filmstrips is used, while placing the frame with a starry sky pattern. However, this device will become uneconomical in terms of energy consumption and produces unwanted noise.
It is possible to invent a projector that is quite economical and also simple, without the use of lenses. For these purposes, you will need the required size canning jar.
It is necessary to create holes around the circle of the jar in order to then arrange a light source of minimal power inside. The light passing through the holes, hitting the ceiling surface, will display the night stars.
Application of laser objects for lighting device
We suggest using this idea to make your own night light, creating the background light of distant stars. At the same time, recreating the constellations using fixed laser pointers, projecting their illumination onto the ceiling surface in the required order.
These pointers are powered by batteries, which immediately run out with constant use of the lighting device. It is for this reason that to use them in a night light, you need to connect the voltage available in the power supply.
For these purposes, you should disassemble the pointer, and also connect to the existing poles on the battery, electrodes, securing the button in the pressed state with electrical tape, or by installing a special jumper on the board.
In a laser, an LED is used as a light source; it is for this reason that the beam does not have destructive characteristics. However, it is still important to ensure that the direct beam of the devices is not directed at the retina of the eyes.
In fact, LEDs have enormous potential for making night light devices on your own, thanks to their compact size, minimal energy consumption, and variety of shades of light.
Night light safety
On various specialized forums there are examples of design ideas in the field of making decorative light, as in the photo of a night light with your own hand below. In addition, methods for working with various decorative elements and various techniques by which visual original effects are produced are described.
To get inspired, you need to visit such sites, however, first of all, wondering what you can make a night light from at home and how, you should worry about complete safety and build a power supply circuit designed for the light source.
There is a myth that the minimum voltage and minimum power of small light sources are the key to complete safety.
In fact, at least volts are not dangerous to humans in direct contact with them. However, when a short circuit occurs, an electric arc will appear at the point of contact, and a current will pass through the wires, heating the insulation system to the ignition temperature.
The power supply will continue to operate for a long period of time during an overload, and the special protective circuit breaker will not react. When equipping night lights, as well as power supplies, on your own, it is important to provide the wiring with a protective system.
Photos of night lights with your own hands
A children's night light plays a huge role in arranging a child's room. It serves so that parents can turn on a light light at night, when the infant has very weak eyes.
In fact, bright light can not only scare a baby, but also harm his vision, so it is necessary to create a light in the child’s room.
At the same time, night lights in the nursery are also useful for older children, who may wake up at night from the desire to drink water or go to the toilet. The room should be equipped for the child and comfort is the very first thing that should be in the nursery.
To prevent a sleepy child from tripping and, as a result, falling, a night light can be installed near his bed.
Night lights for the nursery
If the baby is not walking yet, it will be most convenient to attach the night light to the wall adjacent to the side of the bed.
Stores sell completely different night lights that are attached with clothespins to the sides of the bed, built into mobiles, and even suspended.
If we talk about what lighting principle a night light can have, then the following types are relevant:
- children's night lights - projectors;
- wall sconces;
- various spotlights with dim light;
- night lights for the nursery with a stand (usually in the form of toys).
If you are developing, a good option would be to purchase a green, yellow or blue night light. Among this variety, you can choose a color that suits your interior.
Basic rules when buying a night light in a store
When choosing a night light for a nursery, you need to pay attention to the quality of the materials from which the device is made. When heated, a low-quality night light will release harmful components, gradually melt, and can easily break.
You won’t be able to check all this in the store, however, if the product has a quality confirmation certificate, this will already say a lot.
The light emitted by a night light should be soft but enveloping. Do you think that all materials transmit light equally? Actually this is not true.
How to make a night light with your own hands
A children's night light can be made independently, but the most important thing in this matter is to choose the material for the night light itself, the lamp and the method of operation.
The most important thing is not to use plastic or plastic materials, and it is also undesirable to use paper that will fit tightly to the lamp. But with adult children, this is quite relevant!
Remember, these materials can overheat, begin to melt, and in some cases even catch fire if the night light is used for a long time. If the night light is installed in the room of an adult child, this factor should be taken into account, because the baby can easily forget to turn off the device and fall asleep.
An excellent material for the production of night lights are tin cans, for example, tea cans. Tin has a strong structure and is unlikely to melt.
However, such a night light should not be touched during prolonged use, as it can burn due to its ability to heat up.
Another material for night lights is glass. Here, in the form of a lampshade, you can take any can of an interesting shape, paint it and insert a lamp and a switching element that leads the device to power.
By the way, you can also use batteries as power if you already have similar devices that were previously broken. But how to make a night light if there is none? Let's first figure out what materials you will need for a DIY night light:
- container, for example, a tea box;
- DIY scrap paper for a night light;
- a stationery knife (you need a very sharp one, because we will be cutting the same jar that we took to make a homemade night light;
- acrylic paint;
- sandpaper;
- construction tape;
- glue moment;
- power cord equipped with a socket, switch and lamp.
We will not talk about the production of cords for a night light, since it is extremely undesirable to carry out all the necessary actions independently, without having the appropriate electrical engineering education. Imagine how serious this thing is, and if we are talking about the safety of a child, there is nothing to argue about.
A DIY night light begins with the process of covering the jar with paper. Next, you need to make a hole in the jar, quite large in our case. It will occupy 70% of the front part of the night light.
To make the hole even, you must first take a piece of paper and draw a circle on it that will correspond to the hole. This is where tape will come in handy, with which we will glue the circle to the jar, and then along its contour we will draw with a pencil the area marked for cutting.
When the circle is cut out, we sand its edges so that no one gets hurt in the future. If, we paint the jar with acrylic paint blue, if for a girl - in some other color, for example, pink. You can, of course, leave it white, as we did.
Next, cut out a circle from cardboard, the dimensions of which will be slightly larger than the hole in the jar. It will be a little unusual, as shown in the photo below. To secure this part, you need to use glue.
Then we cut a hole according to the shape of the purchased electrical equipment, and then, when we place the already assembled structure in the nightstand, we secure it. For convenience, you can make corresponding holes in it for wires.
And, of course, the final stage is the design of the night light. The design of a nursery for two can include different design solutions that only your imagination is capable of!